【iCore4 双核心板_FPGA】例程四：Signal Tapll 实验——逻辑分析仪

实验现象：

三色led轮流闪烁，具体的逻辑分析仪使用教程请参考iCore3逻辑分析仪例程

核心代码：

module signal_ctrl(
    input clk_25m,
    input rst_n,
    output fpga_ledr,
    output fpga_ledg,
    output fpga_ledb
);
//--------------------cnt_led-------------------------------//    
reg led_clk;

always @(posedge clk_25m or negedge rst_n)
    if (!rst_n)
        begin
            led_clk <= 1\'d0;
            cnt_led <= 25\'d0;
        end
    else if(cnt_led == 25\'d8000000)
        begin
            cnt_led <= 25\'d0;
            led_clk <= ~led_clk;
        end
    else cnt_led <= cnt_led + 1\'d1;

//--------------------led----------------------------------//            
reg [2:0]led;
reg [24:0]cnt_led;

always @(posedge led_clk or negedge rst_n)
    if (!rst_n)
        begin
            led <= 3\'d1;
        end
    else
        begin
            if (led[2])
                begin
                    led <= 3\'d1;
                end
            else 
                begin
                    led <= led << 1\'d1;
                end
        end

assign {fpga_ledr,fpga_ledg,fpga_ledb} = ~led;

//--------------------endmodule--------------------------//    
endmodule

源代码下载链接：

链接：http://pan.baidu.com/s/1pLyUgQJ 密码：1qfu

iCore4链接：