python 下串口数据的读取，解析，和保存-

#!/usr/bin/python
# -*-coding: utf-8 -*-

import serial
import threading
import binascii
from datetime import datetime
import struct
import csv

class SerialPort:
    def __init__(self, port, buand):
        self.port = serial.Serial(port, buand)
        self.port.close()
        if not self.port.isOpen():
            self.port.open()

    def port_open(self):
        if not self.port.isOpen():
            self.port.open()

    def port_close(self):
        self.port.close()

    def send_data(self):
        self.port.write(\'\')

    def read_data(self):
        global is_exit
        global data_bytes
        while not is_exit:
            count = self.port.inWaiting()
            if count > 0:
                rec_str = self.port.read(count)
                data_bytes=data_bytes+rec_str
                #print(\'当前数据接收总字节数：\'+str(len(data_bytes))+\' 本次接收字节数：\'+str(len(rec_str)))
                #print(str(datetime.now()),\':\',binascii.b2a_hex(rec_str))


serialPort = \'COM6\'  # 串口
baudRate = 115200  # 波特率
is_exit=False
data_bytes=bytearray()

if __name__ == \'__main__\':
    #打开串口
    mSerial = SerialPort(serialPort, baudRate)

    #文件写入操作
    filename=input(\'请输入文件名：比如test.csv:\')
    dt=datetime.now()
    nowtime_str=dt.strftime(\'%y-%m-%d %I-%M-%S\')  #时间
    filename=nowtime_str+\'_\'+filename
    out=open(filename,\'a+\')
    csv_writer=csv.writer(out)

    #开始数据读取线程
    t1 = threading.Thread(target=mSerial.read_data)
    t1.setDaemon(True)
    t1.start()
    
    while not is_exit:
        #主线程:对读取的串口数据进行处理
        data_len=len(data_bytes)
        i=0
        while(i<data_len-1):
            if(data_bytes[i]==0xFF and data_bytes[i+1]==0x5A):
                frame_code=data_bytes[i+2]
                frame_len=struct.unpack(\'<H\',data_bytes[i+4:i+6])[0]
                frame_time=struct.unpack(\'<I\',data_bytes[i+6:i+10])[0]
                print(\'帧类型：\',frame_code,\'帧长度：\',frame_len,\'时间戳：\',frame_time)
                #print(frame_code,frame_len,frame_time)
                if frame_code==0x03:   #判断帧类型
                    #struct 解析数据帧
                    accelerated_x,accelerated_y,accelerated_z,angular_x,angular_y,angular_z,tem,speed_x,speed_y,speed_z,\
                    angular_v_x,angular_v_y,angular_v_z=struct.unpack(\'<fffffffffffff\',data_bytes[i+12:i+12+frame_len-6])
                    dt=datetime.now()
                    nowtime_str=dt.strftime(\'%y-%m-%d %I:%M:%S\')  #时间
                    loc_str=[nowtime_str,frame_time,accelerated_x,accelerated_y,accelerated_z,angular_x,angular_y,angular_z,tem,speed_x,speed_y,speed_z,\
                    angular_v_x,angular_v_y,angular_v_z]

                    #写入csv文件
                    try:
                       csv_writer.writerow(loc_str)
                    except Exception as e:
                       raise e       
                i=i+6+frame_len+3
            else:
                i=i+1
        data_bytes[0:i]=b\'\'

代码简介:本代码主要用来处理陀螺仪发送过来的串口数据，主线程用struct模块对串口数据进行解析，用csv模块对解析出来的数据进行保存，子线程用来进行读取串口数据，并将数据以字节流的方式存储到全局变量data_bytes

笔记：

struct模块，用于解析字节流

binascii模块，用于十六进制形式的显示

bytearray.fromhex()：将十六进制字符串转为字节数组