基于Linux2.6.30.4分析IRQ中断的处理流程。
1.中断入口
/* arch/arm/kenel/entry-armv.S*/ b vector_irq + stubs_offset
2.vector_irq
vector_stub 宏展开即为vector_irq, 参考Linux异常体系之vector_stub宏解析。
/* * Interrupt dispatcher */ vector_stub irq, IRQ_MODE, 4 .long __irq_usr @ 0 (USR_26 / USR_32) .long __irq_invalid @ 1 (FIQ_26 / FIQ_32) .long __irq_invalid @ 2 (IRQ_26 / IRQ_32) .long __irq_svc @ 3 (SVC_26 / SVC_32)
3.__irq_user
__irq_usr: usr_entry /*3.1*/ kuser_cmpxchg_check #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif get_thread_info tsk /*3.2*/ #ifdef CONFIG_PREEMPT /* *r8<--old preempt_count *r7<--preempt_count+1 *preempt_count<--r7 */ ldr r8, [tsk, #TI_PREEMPT] @ get preempt count add r7, r8, #1 @ increment it str r7, [tsk, #TI_PREEMPT] #endif irq_handler /*3.3*/ #ifdef CONFIG_PREEMPT /* *r0<--new preempt_count *preempt<--old preempt_count */ ldr r0, [tsk, #TI_PREEMPT] str r8, [tsk, #TI_PREEMPT] teq r0, r7 strne r0, [r0, -r0] #endif #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_on #endif mov why, #0 b ret_to_user /*3.4*/ UNWIND(.fnend ) ENDPROC(__irq_usr)
3.1__user_entry
.macro usr_entry UNWIND(.fnstart ) UNWIND(.cantunwind ) @ don't unwind the user space /* DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));*/ sub sp, sp, #S_FRAME_SIZE /**/ stmib sp, {r1 - r12} ldmia r0, {r1 - r3} add r0, sp, #S_PC @ here for interlock avoidance mov r4, #-1 @ "" "" "" "" str r1, [sp] @ save the "real" r0 copied @ from the exception stack @ @ We are now ready to fill in the remaining blanks on the stack: @ @ r2 - lr_<exception>, already fixed up for correct return/restart @ r3 - spsr_<exception> @ r4 - orig_r0 (see pt_regs definition in ptrace.h) @ @ Also, separately save sp_usr and lr_usr @ stmia r0, {r2 - r4} /*“^”符号表示访问user mode的寄存器*/ stmdb r0, {sp, lr}^ @ @ Enable the alignment trap while in kernel mode @ alignment_trap r0 @ @ Clear FP to mark the first stack frame @ zero_fp .endm
这里面用到pt_regs结构保存栈上的数据，8字节对齐
/* * This struct defines the way the registers are stored on the * stack during a system call. Note that sizeof(struct pt_regs) * has to be a multiple of 8. */ struct pt_regs { long uregs[18]; };
与之相关的宏定义如下
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0)); DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1)); DEFINE(S_R2, offsetof(struct pt_regs, ARM_r2)); DEFINE(S_R3, offsetof(struct pt_regs, ARM_r3)); DEFINE(S_R4, offsetof(struct pt_regs, ARM_r4)); DEFINE(S_R5, offsetof(struct pt_regs, ARM_r5)); DEFINE(S_R6, offsetof(struct pt_regs, ARM_r6)); DEFINE(S_R7, offsetof(struct pt_regs, ARM_r7)); DEFINE(S_R8, offsetof(struct pt_regs, ARM_r8)); DEFINE(S_R9, offsetof(struct pt_regs, ARM_r9)); DEFINE(S_R10, offsetof(struct pt_regs, ARM_r10)); DEFINE(S_FP, offsetof(struct pt_regs, ARM_fp)); DEFINE(S_IP, offsetof(struct pt_regs, ARM_ip)); DEFINE(S_SP, offsetof(struct pt_regs, ARM_sp)); DEFINE(S_LR, offsetof(struct pt_regs, ARM_lr)); DEFINE(S_PC, offsetof(struct pt_regs, ARM_pc)); DEFINE(S_PSR, offsetof(struct pt_regs, ARM_cpsr)); DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); #define ARM_cpsr uregs[16] #define ARM_pc uregs[15] #define ARM_lr uregs[14] #define ARM_sp uregs[13] #define ARM_ip uregs[12] #define ARM_fp uregs[11] #define ARM_r10 uregs[10] #define ARM_r9 uregs[9] #define ARM_r8 uregs[8] #define ARM_r7 uregs[7] #define ARM_r6 uregs[6] #define ARM_r5 uregs[5] #define ARM_r4 uregs[4] #define ARM_r3 uregs[3] #define ARM_r2 uregs[2] #define ARM_r1 uregs[1] #define ARM_r0 uregs[0] #define ARM_ORIG_r0 uregs[17]