标准库shutil

shutil模块是高级的 文件、文件夹、压缩包 处理模块。

下面是关于其中各种方法的使用介绍：

1.shutil.copyfileobj(fsrc, fdst[, length])
将文件内容拷贝到另一个文件中，可以只拷贝部分内容。

def copyfileobj(fsrc, fdst, length=16*1024):
    """copy data from file-like object fsrc to file-like object fdst"""
    while 1:
        buf = fsrc.read(length)
        if not buf:
            break
        fdst.write(buf)

 

2.shutil.copyfile(src, dst)

拷贝文件

 1 def copyfile(src, dst):
 2     """Copy data from src to dst"""
 3     if _samefile(src, dst):
 4         raise Error("`%s` and `%s` are the same file" % (src, dst))
 5 
 6     for fn in [src, dst]:
 7         try:
 8             st = os.stat(fn)
 9         except OSError:
10             # File most likely does not exist
11             pass
12         else:
13             # XXX What about other special files? (sockets, devices...)
14             if stat.S_ISFIFO(st.st_mode):
15                 raise SpecialFileError("`%s` is a named pipe" % fn)
16 
17     with open(src, 'rb') as fsrc:
18         with open(dst, 'wb') as fdst:
19             copyfileobj(fsrc, fdst)

 

3.shutil.copymode(src, dst)

仅拷贝权限。内容、组、用户均不变

def copymode(src, dst):
    """Copy mode bits from src to dst"""
    if hasattr(os, 'chmod'):
        st = os.stat(src)
        mode = stat.S_IMODE(st.st_mode)
        os.chmod(dst, mode)

 

4.shutil.copystat(src, dst)

拷贝状态的信息，包括：mode bits, atime, mtime, flags

def copystat(src, dst):
    """Copy all stat info (mode bits, atime, mtime, flags) from src to dst"""
    st = os.stat(src)
    mode = stat.S_IMODE(st.st_mode)
    if hasattr(os, 'utime'):
        os.utime(dst, (st.st_atime, st.st_mtime))
    if hasattr(os, 'chmod'):
        os.chmod(dst, mode)
    if hasattr(os, 'chflags') and hasattr(st, 'st_flags'):
        try:
            os.chflags(dst, st.st_flags)
        except OSError, why:
            for err in 'EOPNOTSUPP', 'ENOTSUP':
                if hasattr(errno, err) and why.errno == getattr(errno, err):
                    break
            else:
                raise

　　

5.shutil.copy(src, dst)
拷贝文件和权限

def copy(src, dst):
    """Copy data and mode bits ("cp src dst").

    The destination may be a directory.

    """
    if os.path.isdir(dst):
        dst = os.path.join(dst, os.path.basename(src))
    copyfile(src, dst)
    copymode(src, dst)

　　

6.shutil.copy2(src, dst)
拷贝文件和状态信息

def copy2(src, dst):
    """Copy data and all stat info ("cp -p src dst").

    The destination may be a directory.

    """
    if os.path.isdir(dst):
        dst = os.path.join(dst, os.path.basename(src))
    copyfile(src, dst)
    copystat(src, dst)

　　

7.shutil.ignore_patterns(*patterns)

shutil.copytree(src, dst, symlinks=False, ignore=None)
递归的去拷贝文件

例如：copytree(source, destination, ignore=ignore_patterns('*.pyc', 'tmp*'))

 1 def ignore_patterns(*patterns):
 2     """Function that can be used as copytree() ignore parameter.
 3 
 4     Patterns is a sequence of glob-style patterns
 5     that are used to exclude files"""
 6     def _ignore_patterns(path, names):
 7         ignored_names = []
 8         for pattern in patterns:
 9             ignored_names.extend(fnmatch.filter(names, pattern))
10         return set(ignored_names)
11     return _ignore_patterns
12 
13 def copytree(src, dst, symlinks=False, ignore=None):
14     """Recursively copy a directory tree using copy2().
15 
16     The destination directory must not already exist.
17     If exception(s) occur, an Error is raised with a list of reasons.
18 
19     If the optional symlinks flag is true, symbolic links in the
20     source tree result in symbolic links in the destination tree; if
21     it is false, the contents of the files pointed to by symbolic
22     links are copied.
23 
24     The optional ignore argument is a callable. If given, it
25     is called with the `src` parameter, which is the directory
26     being visited by copytree(), and `names` which is the list of
27     `src` contents, as returned by os.listdir():
28 
29         callable(src, names) -> ignored_names
30 
31     Since copytree() is called recursively, the callable will be
32     called once for each directory that is copied. It returns a
33     list of names relative to the `src` directory that should
34     not be copied.
35 
36     XXX Consider this example code rather than the ultimate tool.
37 
38     """
39     names = os.listdir(src)
40     if ignore is not None:
41         ignored_names = ignore(src, names)
42     else:
43         ignored_names = set()
44 
45     os.makedirs(dst)
46     errors = []
47     for name in names:
48         if name in ignored_names:
49             continue
50         srcname = os.path.join(src, name)
51         dstname = os.path.join(dst, name)
52         try:
53             if symlinks and os.path.islink(srcname):
54                 linkto = os.readlink(srcname)
55                 os.symlink(linkto, dstname)
56             elif os.path.isdir(srcname):
57                 copytree(srcname, dstname, symlinks, ignore)
58             else:
59                 # Will raise a SpecialFileError for unsupported file types
60                 copy2(srcname, dstname)
61         # catch the Error from the recursive copytree so that we can
62         # continue with other files
63         except Error, err:
64             errors.extend(err.args[0])
65         except EnvironmentError, why:
66             errors.append((srcname, dstname, str(why)))
67     try:
68         copystat(src, dst)
69     except OSError, why:
70         if WindowsError is not None and isinstance(why, WindowsError):
71             # Copying file access times may fail on Windows
72             pass
73         else:
74             errors.append((src, dst, str(why)))
75     if errors:
76         raise Error, errors

View Code