1.os_time.c里面
#if OS_TIME_DLY_HMSM_EN > 0
INT8U OSTimeDlyHMSM (INT8U hours, INT8U minutes, INT8U seconds, INT16U ms)
2.有一次竟然把参数 ms赋了1000，殊不知最大值为999，
*Arguments : hours specifies the number of hours that the task will be delayed (max. is 255)
* minutes specifies the number of minutes (max. 59)
* seconds specifies the number of seconds (max. 59)
* milli specifies the number of milliseconds (max. 999)
3.所以在调用库函数的过程中要搞清楚函数的参数
4.另外在阅读系统函数的过程中，可以汲取编程风格。比如：OSTimeDlyHMSM函数
/*
*********************************************************************************************************
* DELAY TASK FOR SPECIFIED TIME
*
* Description: This function is called to delay execution of the currently running task until some time
* expires. This call allows you to specify the delay time in HOURS, MINUTES, SECONDS and
* MILLISECONDS instead of ticks.
*
* Arguments : hours specifies the number of hours that the task will be delayed (max. is 255)
* minutes specifies the number of minutes (max. 59)
* seconds specifies the number of seconds (max. 59)
* milli specifies the number of milliseconds (max. 999)
*
* Returns : OS_ERR_NONE
* OS_ERR_TIME_INVALID_MINUTES
* OS_ERR_TIME_INVALID_SECONDS
* OS_ERR_TIME_INVALID_MS
* OS_ERR_TIME_ZERO_DLY
* OS_ERR_TIME_DLY_ISR
*
* Note(s) : The resolution on the milliseconds depends on the tick rate. For example, you can't do
* a 10 mS delay if the ticker interrupts every 100 mS. In this case, the delay would be
* set to 0. The actual delay is rounded to the nearest tick.
*********************************************************************************************************
*/