ARM&Linux 下驱动开发第三节

后台驱动代码如下：比较昨天的，添加了读写指针位置移动操作

#include<linux/init.h>
#include<linux/module.h>
#include<linux/kernel.h>
#include <linux/poll.h>    /* COPY_TO_USER */
#include<linux/errno.h>
#include <linux/cdev.h>
#include <linux/slab.h>

#define DEV_NAME "rwtest"
#define DEV_NUM 2
#define DEV_MEM_SIZE 4096

static int major=0;
//static int MAX_BUF_LEN=1024;
static char drv_buffer[2][1024];
//static char drv_buf0[1024];
//static char drv_buf1[1024];
//static int WRI_LENGTH=0;
struct cdev cdev;
struct mem_dev * mem_devp; /*璁惧缁撴瀯浣撴寚閽?/

/*mem璁惧鎻忚堪缁撴瀯浣?/
struct mem_dev                                     
{                                                        
  char *data;                      
  unsigned long size;       
};

/***********鍐欏叆*************************/
static ssize_t  dx_write(struct file *filp, const char __user *buffer, size_t size, loff_t * ppos)
{ 
    unsigned long p=*ppos;
    unsigned int count =size;
    int ret=0;
    char * data=filp->private_data ;
    //struct mem_dev *dev = filp->private_data; /*鑾峰緱璁惧缁撴瀯浣撴寚閽?/
    //struct mem_dev *dev=&mem_devp[0];/*鑾峰緱璁惧缁撴瀯浣撴寚閽?  [0]*/
    printk("data:::%s\n",data);
    if(p>=DEV_MEM_SIZE)return 0;
    if(count>DEV_MEM_SIZE-p)
    {
        count=DEV_MEM_SIZE-p;
    }
    printk("write p::%ld\n",p);
    /*浠庤繃鎴风┖闂村啓鍏ユ暟鎹?/
    if(copy_from_user(data + p,buffer,count))
    {
        ret=-EFAULT;
    }
    else
    {
        *ppos +=count;
        ret=count;
        printk(KERN_INFO "written %d bytes from %ld\n",count,p);
    }
    printk("write:%s\n",(char *)(filp->private_data+p));
    printk("write buffer:%s\n",buffer);
    return count;
}
/**************************************璇诲彇***********************************************/
static ssize_t  dx_read(struct file *filp, char __user *buffer, size_t size, loff_t *ppos)
{    
    //鏂囦欢璇诲彇浣嶇疆
    unsigned long p=*ppos;
    unsigned int count =size;//瑕佽鍙栫殑,澶у皬
    int ret=0;
    char * data=filp->private_data ;
    //struct mem_dev *dev = filp->private_data; /*鑾峰緱璁惧缁撴瀯浣撴寚閽?/
    //struct mem_dev *dev=&mem_devp[0];/*鑾峰緱璁惧缁撴瀯浣撴寚閽?  [0]*/
    
    if(p>=DEV_MEM_SIZE)
        return 0;
    if(count>DEV_MEM_SIZE-p)
    {
        count=DEV_MEM_SIZE-p;
    }
    printk("read p::%ld\n",p);
    /*浠庢暟鎹鍒扮敤鎴风┖闂?*/
    if(copy_to_user(buffer,data + p,count))
    {
        ret=-EFAULT;
    }
    else
    {
        *ppos +=count;
        ret=count;
        printk(KERN_INFO "written %d bytes from %ld\n",count,p);
    }
    printk("read:%s\n",(char *)(filp->private_data));
    printk("read buffer:%s\n",buffer);
    return count;
}
 //===========================鎵撳紑=========================================
static int dx_open(struct inode *inode, struct file *filp)
{
    //printk("device open sucess!\n");
    //struct mem_dev *dev;
    /*鑾峰彇娆¤澶囧彿*/
    int num = MINOR(inode->i_rdev);

    if (num >= DEV_NUM) 
        return -ENODEV;
    //dev = &mem_devp[num];
    //dev = drv_buffer[num];
    printk("num:%d\n",num);
    /*灏嗚澶囨弿杩扮粨鏋勬寚閽堣祴鍊肩粰鏂囦欢绉佹湁鏁版嵁鎸囬拡*/
    filp->private_data = drv_buffer[num];
    filp->f_pos +=strlen(drv_buffer[num]);
    printk("open:%s\n",(char *)filp->private_data);
    return 0;
}
/**********************************release***************************************************/
static int  dx_release(struct inode *inode, struct file *filp)
{
    printk("device release\n");
    return 0;
}

 
static loff_t dx_llseek(struct file *filp, loff_t offset, int whence)
{ 
    loff_t newpos;

    switch(whence) {
        case 0: /* SEEK_SET */
            newpos = offset;//鏂囦欢寮€濮嬩綅缃姞鍋忕Щ閲?            break;
        case 1: /* SEEK_CUR */
            newpos = filp->f_pos + offset;//褰撳墠鎸囬拡浣嶇疆鍔犲亸绉婚噺
            break;
        case 2: /* SEEK_END */
            newpos = DEV_MEM_SIZE -1 + offset;//鏂囦欢鏈熬鍔犲亸绉婚噺(鏈€鍚庝竴浣嶄负'\0')
            break;
        default: /* can't happen */
            return -EINVAL;
    }
    if ((newpos<0) || (newpos>DEV_MEM_SIZE))
        return -EINVAL;
    filp->f_pos = newpos;
    return newpos;
}


//===============缁撴瀯浣?椹卞姩鍚勫睘鎬?=========
static struct file_operations file_opt = {
    .owner=    THIS_MODULE,
    .llseek=  dx_llseek,
    .write=    dx_write,    
    .read=    dx_read,    
    .open=    dx_open,  
    .release=dx_release,
};
//----------------------------------------------------------------------
static int __init qudong_init(void)
{
    int ret;
     ret = register_chrdev(0, DEV_NAME, &file_opt);
     if(ret<0)
     {
         printk(DEV_NAME " can't get major number\n");
        return 0;
     }
     major=ret;
     printk("dx module major number is %d\n", ret);
     return 0;
}
//-----------------------------------------------------------------------
static void __exit qudong_exit(void)
{
    /*娉ㄩ攢璁惧*/
    cdev_del(&cdev);
    //kfree(mem_devp);     /*閲婃斁璁惧缁撴瀯浣撳唴瀛?/
    unregister_chrdev_region(MKDEV(major,0),1);/*閲婃斁璁惧鍙?/
    printk("exit\n");
}
module_init(qudong_init);
module_exit(qudong_exit);
MODULE_LICENSE("GPL");/*浣跨敤鏉冮檺*/
MODULE_AUTHOR("Made in China  <china@hotmail.com>");/*浣滆€?/
MODULE_DESCRIPTION("s3c6410 Hypervisor Filesystem");/*鐗堟湰*/

View Code