ERROR:Out of Memory!

Topic: ERROR:Out of Memory!     Posted: January 27 2010 at 9:50am
HI,Everyone!      I have a big trouble!       I have a lot of 3D models in xpl format,and I add all of them to TEP uisng stream layer. At the beginning the TEP runned smoothly,but after running for a while it turned very slowly and then appeared out of memory error. It will be much better after I refresh the layer when TEP runned slowly. Is TEP not automatically unload the memory Or still need to set something? who can help me?   t least. The layer's maxvisibility is 500m Edited by haihao - January 29 2010 at 2:25pm
wengel       Joined: June 08 2007  Location: United States  Status: Offline  Points: 39	Post Options       Thanks(0)     Posted: January 27 2010 at 6:53pm
	Hi, How is your SHP file configured?  Is your block width set to Auto?  Also, what is your maximum streaming altitude? About the objects themselves, what is the setting for "Best LOD Size"? When you created these XPLs, did you use MakeXPL.exe that comes with the Pro install?  If so, how did you set these to be built?   Looking forward to your reply.   -Wilson
wengel       Joined: June 08 2007  Location: United States  Status: Offline  Points: 39	Post Options       Thanks(0)     Posted: January 28 2010 at 4:03pm
	One other thing -- is your graphics card's driver is up to date? Also-- can you provide the specs on it?  Is it shared memory or dedicated card?   -Wilson
haihao       Joined: February 19 2009  Status: Offline  Points: 8	Post Options       Thanks(0)     Posted: January 29 2010 at 2:17pm
	Hi,Wilson! Thank you for your reply!   My block width is 512m,It's very small.   Maximum streaming altitude is 700m,It's very low.   "Best LOD Size" is 1000m.It's default.   I used "MakeXpl.exe" to create xpls,and most of the xpls have three levels.   My NoteBook: Graphics card is GF 9600GT;OS is winXPSP3;Memory is 2G,CPU is T6600.   automatically unload?   By the way my TEP vision is 5.1.0.f23   by haihao Edited by haihao - January 29 2010 at 2:26pm
wengel       Joined: June 08 2007  Location: United States  Status: Offline  Points: 39	Post Options       Thanks(0)     Posted: January 29 2010 at 3:20pm
	Thanks for the reply. Your setup seems OK, but what about the driver date?  It's a good idea to check the NVidia website for a new driver.  Are other machines showing this problem too?  At 700m maximum streaming altitude, you're probably seeing pretty high resolution just as the buildings are starting to stream in.  Is that right? Without seeing the project or screenshots, best advice is to adjust LOD up to 1200.  Can you post/email the fly file or screenshots? I'd also recommend you upgrade to the latest TEPro if that's possible.