1、下载安装迷思奇
Mixly For Arduino (Windows) v0.999
http://www.yfrobot.com/thread-12034-1-1.html
Mixly轻松入门02：米思齐（Mixly）软件安装及初体验
2、准备硬件并连接好硬件设备
3、米思奇下载成功后，双击安装并打开软件，可以看到如下界面
4、在代码编辑区编写如下代码
volatile int debounce;
volatile int p;
volatile int r;
volatile int state;
volatile int time;
void setup(){
r = 0;
state = HIGH;
p = LOW;
time = 0;
debounce = 200;
pinMode(4, INPUT);
pinMode(8, INPUT);
pinMode(8, OUTPUT);
}
void loop(){
r = digitalRead(4);
if (r == HIGH && (p == LOW && millis() - time > debounce)) {
if (state == HIGH) {
state = LOW;
} else {
state = HIGH;
}
time = millis();
}
digitalWrite(8,state);
p = r;
}
5、在模块区域搭建好模块
6、编译并连接端口
7、上传完成，观察效果，触摸，LED灯亮，不触摸，灯灭