When you arm and disarm your Abode home security system, it delays it for 60 seconds by default, presumably to give you enough time to leave the house before the whole system is armed. Here’s how to change the delay time or disable it completely.
当您对Abode家庭安全系统进行布防和撤防时，默认情况下它将延迟60秒，以使您有足够的时间在整个系统布防之前离开房屋。 更改延迟时间或完全禁用延迟时间的方法如下。
To do this, you’ll need to visit Abode’s web interface, as the app doesn’t support making these changes. Once you get to the web interface, log in using your Abode account credentials.
为此，您需要访问Abode的Web界面 ，因为该应用程序不支持进行这些更改。 进入Web界面后，请使用Abode帐户凭据登录。
Once you’re logged in, click on “Account” in the left-hand sidebar.
登录后，单击左侧边栏中的“帐户”。
Select “System Settings”.
选择“系统设置”。
There is a section called “Time Settings”. This is where you can change the delay.
有一个称为“时间设置”的部分。 您可以在此处更改延迟。
There are four settings you can customize:
您可以自定义四个设置：
-
Entry Delay for Away: When your system is armed and you enter your house, this is how much time you have to disarm your system before the alarm goes off.
离开的进入延迟：当系统布防并且进入房屋时，这是在警报响起之前必须撤防系统的时间。
-
Exit Delay for Away: This is how much time you have to leave the house after you arm your system before it actually arms.
离开延迟离开：这是您在系统布防之前必须离开系统的实际时间。
-
Entry Delay for Home: Similar to “Entry Delay for Away”, but for when you’re home.
家庭入场延迟：类似于“出门入场延迟”，但适用于您在家的时间。
-
Exit Delay for Home: Similar to “Exit Delay for Away”, but for when you’re home.
离开家的延迟时间：与“离开家的延迟时间”相似，但适用于您在家的时间。
For each setting, you can either disable the delay completely or choose a delay time between 10 seconds and four minutes.
对于每种设置，您可以完全禁用延迟，也可以选择10秒到4分钟之间的延迟时间。
Personally, 30 seconds is a good delay time for the first two settings, and then completely disabling the bottom two would be ideal. However, play around with them to come up with delays that work well for you.
就个人而言，对于前两个设置而言，30秒是一个不错的延迟时间，然后完全禁用后两个设置将是理想的。 但是，请与他们一起玩，以找出适合您的延迟时间。
Below this section is the “Gateway Sound Settings” section, which includes customizations for volume and alarm duration. When a delay goes live, the main hub will beep, so this is where you can customize that.
此部分下面是“网关声音设置”部分，其中包括音量和警报持续时间的自定义。 延迟生效后，主集线器将发出蜂鸣声，因此您可以在其中进行自定义。
Again, play around with these to find the ideal volume setting. Unfortunately, though, you can only select between Off, Low, and High. So there aren’t a whole lot options to choose from.
再次，使用它们来找到理想的音量设置。 但是，不幸的是，您只能在“关”，“低”和“高”之间进行选择。 因此，没有太多选择。