pe系统中将usb驱动导入
If you use multiple USB drives, you’ve probably noticed that the drive letter can be different each time you plug one in. If you’d like to assign a static letter to a drive that’s the same every time you plug it in, read on.
如果您使用多个USB驱动器，您可能会注意到每次插入一个驱动器盘符都会有所不同。如果您想为每次插入的驱动器分配相同的静态盘符，请阅读上。
Windows assigns drive letters to whatever type of drive is available—floppies, internal hard disks, optical drives, SD cards, and external USB drives. This can be annoying—especially if you use backup tools or portable apps that prefer to have the same drive letter every time.
Windows将驱动器号分配给任何可用的驱动器类型-软盘，内部硬盘，光盘驱动器，SD卡和外部USB驱动器。 这可能很烦人，尤其是如果您使用备份工具或便携式应用程序 ，而这些工具或便携式应用程序每次都希望使用相同的驱动器号。
To work with drive letters, you’ll use the Disk Management tool built into Windows. In Windows 7, 8, or 10, click Start, type “create and format,” and then click “Create and format hard disk partitions.” Don’t worry. You’re not going to be formatting or creating anything. That’s just the Start menu entry for the Disk Management tool. This procedure works the same in pretty much any version of Windows (though in Windows XP and Vista, you’d need to launch Disk Management through the Administrative Tools item in the Control Panel).
要使用驱动器号，您将使用Windows内置的磁盘管理工具。 在Windows 7、8或10中，单击“开始”，键入“创建并格式化”，然后单击“创建并格式化硬盘分区”。 不用担心 您不会格式化或创建任何内容。 这只是“磁盘管理”工具的“开始”菜单项。 在几乎所有Windows版本中，此过程都相同(尽管在Windows XP和Vista中，您需要通过“控制面板”中的“管理工具”项启动“磁盘管理”)。
Windows will scan and then display all the drives connected to your PC in the Disk Management window. Right-click the USB drive to which you want to assign a persistent drive letter and then click “Change Drive Letter and Paths.”
Windows将扫描，然后在“磁盘管理”窗口中显示连接到PC的所有驱动器。 右键单击要为其分配永久驱动器号的USB驱动器，然后单击“更改驱动器号和路径”。
The “Change Drive Letter and Paths” window the selected drive’s current drive letter. To change the drive letter, click “Change.”
“更改驱动器号和路径”窗口将显示所选驱动器的当前驱动器号。 要更改驱动器号，请单击“更改”。
In the “Change Drive Letter or Path” window that opens, make sure the “Assign the following drive letter” option is selected and then use the drop-down menu to select a new drive letter. When you’re done, click “OK.”
在打开的“更改驱动器号或路径”窗口中，确保选中“分配以下驱动器号”选项，然后使用下拉菜单选择新的驱动器号。 完成后，单击“确定”。
NOTE: We suggest picking a drive letter between M and Z, because earlier drive letters may still get assigned to drives that don’t always show up in File Explorer—like optical and removable card drives. M through Z are almost never used on most Windows systems.
注意：我们建议选择一个介于M和Z之间的驱动器号，因为较早的驱动器号可能仍会分配给并非总是显示在File Explorer中的驱动器，例如光驱和可移动卡驱动器。 M到Z几乎从未在大多数Windows系统上使用。
Windows will display a warning letting you know that some apps might rely on drive letters to run properly. For the most part, you won’t have to worry about this. But if you do have any apps in which you’ve specified another drive letter for this drive, you may need to change them. Click “Yes” to continue.
Windows将显示警告，通知您某些应用程序可能依赖于驱动器号才能正常运行。 在大多数情况下，您不必为此担心。 但是，如果您确实有在其中为此驱动器指定了另一个驱动器号的任何应用程序，则可能需要更改它们。 单击“是”继续。
Back in the main Disk Management window, you should see the new drive letter assigned to the drive. You can now close the Disk Management window.
返回“磁盘管理”主窗口，您应该看到分配给驱动器的新驱动器号。 现在，您可以关闭“磁盘管理”窗口。
From now on, when you disconnect and reconnect the drive, that new drive letter should persist. You can also now use fixed paths for that drive in apps—such as back up apps—that may require them.
从现在开始，当您断开并重新连接驱动器时，该新驱动器号应继续存在。 现在，您还可以在可能需要它们的应用程序(例如备份应用程序)中使用该驱动器的固定路径。
翻译自: https://www.howtogeek.com/96298/assign-a-static-drive-letter-to-a-usb-drive-in-windows-7/
pe系统中将usb驱动导入