If you get all kinds of different folks approaching your door, a video doorbell like the SkyBell HD is a worthwhile investment, but you may not be using it to its full potential. Here’s how to get the most out of your SkyBell HD video doorbell.
如果您遇到各种各样的人，像SkyBell HD这样的视频门铃是值得的投资，但是您可能没有充分利用它。 这是充分利用SkyBell HD视频门铃的方法。
更改视频质量 (Change the Video Quality)
The SkyBell HD can stream and record video up to 1080p in resolution. However, if your internet connection can’t quite handle the load, you can change the video quality.
SkyBell HD可以流式传输和录制分辨率高达1080p的视频。 但是，如果您的Internet连接不能完全处理负载，则可以更改视频质量 。
Just open up the settings in the SkyBell HD app and select “Image Quality”. From there, you can select a lower quality than 1080p, as far down as 480p. Keep in mind, this will make it more difficult to identify people at your door, so be sure to experiment and find the best balance that you can.
只需在SkyBell HD应用程序中打开设置，然后选择“图像质量”即可。 从那里，您可以选择比1080p更低的质量，甚至低至480p。 请记住，这将使识别您家门口的人更加困难，因此请务必尝试并找到最佳平衡点。
与其他家庭成员共享访问权限 (Share Access with Other Family Members)
The SkyBell doesn’t work nearly as well if you’re the only person in your household that has access to it, which is why you’ll want to share access to the video doorbell with other family members.
如果您是家庭中唯一有权使用SkyBell的人，那么SkyBell的效果将不尽如人意，这就是为什么您要与其他家庭成员共享对视频门铃的访问权限的原因。
You can do this by going into the settings and tapping on “Manage Sharing”. From there, you can invite someone via email and they’ll be able to view the SkyBell’s live video feed and see past recordings.
您可以通过进入设置并点击“管理共享”来做到这一点。 从那里，您可以通过电子邮件邀请某人，他们将可以查看SkyBell的实时视频供稿并查看过去的记录。
启用“请勿打扰” (Enable “Do Not Disturb”)
While technically it’s not called Do Not Disturb, the SkyBell HD has a feature where you can “mute” the doorbell so that when someone presses the button, it doesn’t actually ring the doorbell.
从技术上讲，它不称为“请勿打扰”，但SkyBell HD具有一项功能，您可以“静音”门铃，这样当有人按下按钮时，它实际上不会使门铃响起。
Jump into the settings and tap on “Indoor Chime”. From there, hit the toggle switch next to “Indoor Chime” to turn it off and mute the doorbell. Keep in mind, though, that this will still send you notifications through your phone unless you turn those off separately.
跳入设置，然后点击“室内风铃”。 从那里，点击“室内门铃”旁边的拨动开关将其关闭并静音门铃。 不过请记住，除非您分别关闭这些通知，否则仍会通过手机向您发送通知。
调整动作灵敏度 (Adjust the Motion Sensitivity)
While you can get alerted on your phone whenever the doorbell button is pressed, you can also receive alerts whenever motion is detected. However, you’ll likely want to adjust the motion sensitivity.
虽然每当按下门铃按钮时都会在电话上提醒您，但每当检测到运动时，您也会收到警报。 但是，您可能需要调整运动灵敏度 。
In the settings, tap on “Motion Detection”. Enable it if it isn’t already and then select either “High”, “Medium”, or “Low” as far the sensitivity goes.
在设置中，点击“运动检测”。 如果尚未启用，请启用它，然后选择“高”，“中”或“低”。
下载视频进行共享 (Download Videos for Sharing)
While you can view recorded videos in the SkyBell app, they go away after a certain amount of time. So if you want to keep any recordings for the future, you’ll want to download them in case you need to share them with the police or anyone else.
虽然您可以在SkyBell应用程序中查看录制的视频，但一定时间后它们就会消失。 因此，如果您想保留将来的任何录音，则需要将其下载 ，以防需要与警察或其他任何人共享。
On iOS, you just swipe on a video and hit “Download”. On Android, just tap on the download button next to the video. It will then be saved to your phone’s local storage where you can do whatever you want with it.
在iOS上，您只需滑动视频并点击“下载”。 在Android设备上，只需点击视频旁边的下载按钮。 然后将其保存到手机的本地存储中，您可以在其中进行任何操作。
更改LED颜色 (Change the LED Color)
This isn’t really a huge feature of the SkyBell HD, but it does allow you to give it some personality. By default, the button lights up green, but you can change it to pretty much any color you want.
这并不是SkyBell HD的巨大功能，但确实可以赋予它一些个性。 默认情况下，该按钮点亮为绿色，但是您可以将其更改为几乎所需的任何颜色 。
Tap on “LED” in the settings menu and then select “Color” on the next screen. From there, you can use the color picker to select your favorite color to use. You can even change the brightness of the button’s LED.
在设置菜单中点击“ LED”，然后在下一个屏幕上选择“颜色”。 在这里，您可以使用颜色选择器选择您喜欢的颜色。 您甚至可以更改按钮LED的亮度。
利用实时显示功能 (Take Advantage of the Live View Features)
When someone rings the doorbell and you go to view the live video feed, many users forget that there’s more you can do on this screen than just seeing who’s at the door.
当有人按门铃并去观看实时视频时，许多用户忘记了在此屏幕上除了可以看到谁在门外，您还可以做更多的事情。
For example, you can take a snapshot of the video feed at any time, as well as use the microphone to talk to the person at the door. You can even tap on the gear icon to access integration with other apps, like the Kevo app to unlock your door right from that screen.
例如，您可以随时对视频源进行快照，也可以使用麦克风与门口的人交谈。 您甚至可以点击齿轮图标以访问与其他应用程序的集成，例如Kevo应用程序，以从该屏幕上立即解锁您的门。
连接到IFTTT获得更多功能 (Connect to IFTTT for More Functionality)
The Skybell HD comes with a considerable amount of customization and functionality, but you can do even more with it by linking it to IFTTT and taking advantage of some automation.
Skybell HD具有大量的自定义和功能，但是您可以通过将其链接到IFTTT并利用一些自动化功能来做更多的事情。
For example, you can have your smart lights blink whenever someone rings the doorbell, or you can have your porch light automatically turn on when motion is detected at your front door.
例如，您可以在有人敲门铃时让智能灯闪烁 ，或者可以在前门检测到运动时自动打开门廊灯。
翻译自: https://www.howtogeek.com/329819/how-to-get-the-most-out-of-your-skybell-hd/