家用千兆路由器什么好一点
Earlier this week we asked you to share the ways you’ve enhanced your home router. We’ve rounded up the responses here; read on to see how your fellow readers supercharge their home routers.
本周初，我们要求您分享增强家用路由器的方法。 我们在这里汇总了所有答复； 请继续阅读，以了解您的其他读者如何增强家用路由器的性能。
Custom firmware rules the roost when it comes to tweaking your router. The majority of responding readers highlighted the custom firmware on their routers and the benefits in provided. Kevin, for example, runs his entire extended Wi-Fi network using DD-WRT:
在调整路由器时，自定义固件将决定一切。 大多数回应读者都强调了路由器上的自定义固件以及所提供的好处。 例如，凯文(Kevin)使用DD-WRT运行他的整个扩展Wi-Fi网络：
My main router is a Linksys with DD-WRT. It runs QOS, a private v*n, some port-forwarding and manages my PPPOE connection. (My DSL modem is in bridge mode and is completely passive.)
我的主要路由器是带有DD-WRT的Linksys。 它运行QOS，专用v*n，一些端口转发并管理我的PPPOE连接。 (我的DSL调制解调器处于桥接模式，并且完全是被动的。)
I have a couple of other Linksys/DD-WRT units that act as wireless bridges. One of them is connected to a couple of cheap Ubuntu boxes that act as network storage and do nightly, on-site back-ups of all of my data. Now, if I can just find an off-site solution that’s not too pricey.
我还有几个其他的Linksys / DD-WRT单元充当无线网桥。 其中一个连接到几个便宜的Ubuntu盒子，这些盒子充当网络存储，并每晚对我的所有数据进行现场备份。 现在，如果我能找到一个不太昂贵的异地解决方案。
Trevor notes that DD-WRT is so popular that Buffalo is shipping routers with it pre-installed:
Trevor指出DD-WRT非常受欢迎，以至于Buffalo出厂时都预装了路由器：
I loaded DD-WRT onto my Buffalo router when I first got it and love it. Now Buffalo is shipping with DD-WRT pre-installed, giving you both great hardware and firmware right out of the box. I set mine up for remote access with DynDNS so I don’t ever have to mess around with IP addresses, and then configured all my computers and router for VNC and any other remote access I need.
第一次得到它并喜欢它时，我就将DD-WRT加载到了我的Buffalo路由器上。 现在Buffalo出厂时已预装DD-WRT，可为您立即提供出色的硬件和固件。 我设置了我的DynDNS远程访问权限，因此不必再搞乱IP地址，然后为VNC和我需要的其他任何远程访问配置了我的所有计算机和路由器。
Daymon, like Kevin, also uses extra routers as repeaters:
与Kevin一样，Daymon也使用额外的路由器作为中继器：
I added a simple WiFi repeater in the center of my house, so the main router has a strong signal in the front part of the house, and the repeater gets that signal, and boosts it from that point giving me a good signal in the back of the house, and even out to my deck!
我在房子的中央添加了一个简单的WiFi中继器，因此主路由器在房子的前部具有很强的信号，并且中继器会收到该信号，并从该点增强信号，从而在后面给我一个良好的信号。房子，甚至到我的甲板上！
It’s wireless, and only needs a power source, so it can be easily hidden. I used the original router’s SSID, and just added EXT (extended) on the end, so I know which router I’m connected to at any given time.
它是无线的，只需要一个电源，因此可以轻松隐藏。 我使用了原始路由器的SSID，并在末尾添加了EXT(扩展)，因此我知道在任何给定时间我都连接到哪个路由器。
Although DD-WRT received quite a few nods, Tomato didn’t go unloved. LVDave weighs in with:
尽管DD-WRT受到了很多好评，但Tomato并没有受到人们的喜爱。 LVDave具有以下优势：
One word: Tomato! I have a Linksys WRT54GL, and the difference between the stock firmware from Linksys and Tomato is like night/day.. I’ve tried DDWRT and others, and came back to Tomato. Best f/w for a Linksys router in my opinion…
一句话：番茄！ 我有一个Linksys WRT54GL，Linksys和Tomato的备用固件之间的区别就像晚上/白天一样。我尝试了DDWRT等，然后又回到了Tomato。 我认为，Linksys路由器的最佳固件。
Brodiemacnic loves Tomato but wishes it was in wider development:
Brodiemacnic喜欢Tomato，但希望它能在更广泛的领域发展：
Over the years I have used Tomato and DD-WRT on a variety of router but mostly on Linksys WRT54G and the Asus models. I find Tomato the easiest to use and even found a custom version that supports USB on the Asus router. It woks very well for network printing but I’ve found it a little difficult to use for a shared network storage. DD-WRT is much more feature rich but you really need to know what you are doing to work with that one. I really wish Tomato supported more routers that is does. It’s really a shame that it doesn’t.
多年来，我已经在各种路由器上使用了Tomato和DD-WRT，但大部分用于Linksys WRT54G和Asus型号。 我发现Tomato是最容易使用的，甚至找到了在华硕路由器上支持USB的自定义版本。 它可以很好地用于网络打印，但是我发现将其用于共享网络存储有些困难。 DD-WRT具有更多的功能，但是您确实需要知道您正在使用该功能。 我真的希望Tomato支持更多的路由器。 真遗憾，事实并非如此。
Rothbart takes the whole DIY aspect of using a custom ROM to a new level by rolling his own router:
Rothbart通过滚动自己的路由器将使用自定义ROM的整个DIY方面提升到一个新的水平：
I’m using Astaro Security Gateway on a dual-nic dedicated machine. It’s like a super-router/security gateway/firewall/content filter/antivirus scanner/magic widget.
我在双网卡专用计算机上使用Astaro Security Gateway 。 就像超级路由器/安全网关/防火墙/内容过滤器/防病毒扫描程序/魔术小部件。
And… it’s free. I just had to devote a spare machine and electricity to running it. Well worth it IMO.
而且...是免费的。 我只需要花一台备用机器和电力来运行它。 IMO值得。
For more reader tips and tricks hit up the original comment thread here.
有关更多读者提示和技巧，请点击此处原始评论主题。
翻译自: https://www.howtogeek.com/76433/what-you-said-supercharging-your-home-router/
家用千兆路由器什么好一点