机械手臂-DH参数

机械手臂的一个重要特征参数就是DH参数。
具体资料可查询：维基百科英文版：http://en.wikipedia.org/wiki/Denavit%E2%80%93Hartenberg_parameters
由于被墙，现摘录如下：

Denavit–Hartenberg parameters

From Wikipedia, the free encyclopedia

The Denavit–Hartenberg parameters (also called DH parameters) are the four parameters associated with a particular convention for attaching reference frames to the links of a spatial kinematic chain, or robot manipulator.

Jacques Denavit and Richard Hartenberg introduced this convention in 1955 in order to standardize the coordinate frames for spatial linkages. ^[1] ^[2]

Richard Paul demonstrated its value for the kinematic analysis of robotic systems in 1981.^[3] While many conventions for attaching references frames have been developed, the Denavit-Hartenberg convention remains the standard approach.

[hide]

Denavit-Hartenberg convention

A commonly used convention for selecting frames of reference in robotics applications is the Denavit and Hartenberg (D–H) convention which was introduced by Jacques Denavit and Richard S. Hartenberg. In this convention, coordinate frames are attached to the joints between two links such that one transformation is associated with the joint, [Z], and the second is associated with the link [X]. The coordinate transformations along a serial robot consisting of n links form the kinematics equations of the robot,

where [T] is the transformation locating the end-link.

In order to determine the coordinate transformations [Z] and [X], the joints connecting the links are modeled as either hinged or sliding joints, each of which have a unique line S in space that forms the joint axis and define the relative movement of the two links. A typical serial robot is characterized by a sequence six lines S_i, i=1,...,6, one for each joint in the robot. For each sequence of lines S_i and S_i+1, there is a common normal line A_i,i+1. The system of six joint axes S_i and five common normal lines A_i,i+1 form the kinematic skeleton of the typical six degree of freedom serial robot. Denavit and Hartenberg introduced the convention that Z coordinate axes are assigned to the joint axes S_i and X coordinate axes are assigned to the common normals A_i,i+1.

This convention allows the definition of the movement of links around a common joint axis S_i by the screw displacement,

where θ_i is the rotation around and d_i is the slide along the Z axis---either of the parameters can be constants depending on the structure of the robot. Under this convention the dimensions of each link in the serial chain are defined by the screw displacement around the common normal A_i,i+1 from the joint S_i to S_i+1, which is given by

where α_i,i+1 and a_i,i+1 define the physical dimensions of the link in terms of the angle measured around and distance measured along the X axis.

In summary, the reference frames are laid out as follows:

the -axis is in the direction of the joint axis
the -axis is parallel to the common normal:
If there is no unique common normal (parallel axes), then (below) is a free parameter. The direction of is from to , as shown in the video below.
the -axis follows from the - and -axis by choosing it to be a right-handed coordinate system.

The transformation is then described by the following four parameters known as D–H parameters:.^[4]

: offset along previous to the common normal
: angle about previous , from old to new
: length of the common normal (aka , but if using this notation, do not confuse with ). Assuming a revolute joint, this is the radius about previous .
: angle about common normal, from old axis to new axis

A visualization of D–H parameterization is available:

There is some choice in frame layout as to whether the previous 机械手臂-DH参数 axis or the next points along the common normal. The latter system allows branching chains more efficiently, as multiple frames can all point away from their common ancestor, but in the alternative layout the ancestor can only point toward one successor. Thus the commonly used notation places each down-chain 机械手臂-DH参数 axis collinear with the common normal, yielding the transformation calculations shown below.

We can note constraints on the relationships between the axes:

the -axis is perpendicular to both the and axes
the -axis intersects both and axes
the origin of joint is at the intersection of and
completes a right-handed reference frame based on and

Denavit-Hartenberg matrix

It is common to separate a screw displacement into the product of a pure translation along a line and a pure rotation about the line,^[5]^[6] so that

and

Using this notation, each link can be described by a coordinate transformation from the previous coordinate system to the next coordinate system.

Note that this is the product of two screw displacements, The matrices associated with these operations are:

This gives:

where R is the 3×3 submatrix describing rotation and T is the 3×1 submatrix describing translation.

Use of Denavit and Hartenberg matrices

The Denavit and Hartenberg notation gives a standard methodology to write the kinematic equations of a manipulator. This is specially useful for serial manipulators where a matrix is used to represent the pose (position and orientation) of one body with respect to another.

The position of body 机械手臂-DH参数 with respect to may be represented by a position matrix indicated with the symbol or

This matrix is also used to transform a point from frame 机械手臂-DH参数 to

Where the upper left 机械手臂-DH参数 submatrix of represents the relative orientation of the two bodies, and the upper right represents their relative position.

The position of body 机械手臂-DH参数 with respect to body can be obtained as the product of the matrices representing the pose of with respect of and that of with respect of

An important property of Denavit and Hartenberg matrices is that the inverse is

where 机械手臂-DH参数 is both the transpose and the inverse of the orthogonal matrix , i.e. .

Kinematics

Further matrices can be defined to represents velocity and acceleration of bodies.^[5]^[6] The velocity of body 机械手臂-DH参数 with respect to body can be represented in frame by the matrix

where 机械手臂-DH参数 is the angular velocity of body with respect to body and all the components are expressed in frame ; is the velocity of one point of body with respect to body (the pole). The pole is the point of passing through the origin of frame .

The acceleration matrix can be defined as the sum of the time derivative of the velocity plus the velocity squared

The velocity and the acceleration in frame 机械手臂-DH参数 of a point of body can be evaluated as

It is also possible to prove that

Velocity and acceleration matrices add up according to the following rules

in other words the absolute velocity is the sum of the drag plus the relative velocity; for the acceleration the Coriolis' term is also present.

The components of velocity and acceleration matrices are expressed in an arbitrary frame 机械手臂-DH参数 and transform from one frame to another by the following rule

[edit]Dynamics

For the dynamics 3 further matrices are necessary to describe the inertia 机械手臂-DH参数 , the linear and angular momentum , and the forces and torques applied to a body.

Inertia 机械手臂-DH参数 :

where 机械手臂-DH参数 is the mass, represent the position of the center of mass, and the terms represent inertia and are defined as

Action matrix 机械手臂-DH参数 , containing force and torque :

Momentum matrix 机械手臂-DH参数 , containing linear and angular momentum

the all the matrices are represented with the vector components in a certain frame 机械手臂-DH参数 . Transformation of the components from frame to frame follows to rule

The matrices described allow the writing of the dynamic equations in a concise way.

Newton's law:

Momentum:

The first of these equations express the Newton's law and is the equivalent of the vector equation 机械手臂-DH参数 (force equal mass times acceleration) plus (angular acceleration in function of inertia and angular velocity); the second equation permits the evaluation of the linear and angular momentum when velocity and inertia are known.

References

^ Denavit, Jacques; Hartenberg, Richard Scheunemann (1955). "A kinematic notation for lower-pair mechanisms based on matrices". Trans ASME J. Appl. Mech 23: 215–221.
^ Hartenberg, Richard Scheunemann; Denavit, Jacques (1965). Kinematic synthesis of linkages. McGraw-Hill series in mechanical engineering. New York: McGraw-Hill. p. 435.
^ Paul, Richard (1981). Robot manipulators: mathematics, programming, and control : the computer control of robot manipulators. Cambridge, MA: MIT Press. ISBN 978-0-262-16082-7.
^ Spong, Mark W.; Vidyasagar, M. (1989). Robot Dynamics and Control. New York: John Wiley & Sons. ISBN 9780471503521.
^ ^a ^b Legnani, G.; Casolo, F.; Righettini, P.; Zappa, B. (1996). "A homogeneous matrix approach to 3D kinematics and dynamics — I. Theory". Mechanism and Machine Theory 31 (5): 573. doi:10.1016/0094-114X(95)00100-D. edit
^ ^a ^b Legnani, G.; Casalo, F.; Righettini, P.; Zappa, B. (1996). "A homogeneous matrix approach to 3D kinematics and dynamics—II. Applications to chains of rigid bodies and serial manipulators". Mechanism and Machine Theory 31 (5): 589. doi:10.1016/0094-114X(95)00101-4. edit

一台6轴的机械手臂以马达旋转中心点抽象为6个点与连杆结构。

转载于:https://www.cnblogs.com/shumaojie/archive/2013/03/25/2980576.html