【Linux】vbox 服务器 局域网络配置

step1：配置虚拟机交换网卡，切勿启动DHCP服务器

step2：配置虚拟机外设网卡

step3：配置NAT和host-only网卡的驱动信息

vi /etc/udev/rules.d/70-persistent-net.rules

[root@redisser ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0     //修改网卡1的配置文件
DEVICE=eth0
HWADDR=08:00:27:1A:C3:F2                                                            //eth0物理地址
TYPE=Ethernet
UUID=a325036c-297d-4f3b-bfc7-41eed4ec4f74
ONBOOT=yes                                                                                   //设为开机启动网卡
NM_CONTROLLED=yes
BOOTPROTO=dhcp

[root@redisser ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth1     //修改网卡2的配置文件，若没有可以新建一份
DEVICE=eth1
HWADDR=08:00:27:42:5D:D0                                                            //eth1物理地址
TYPE=Ethernet
ONBOOT=yes                                                                                    //设为开机启动网卡
NM_CONTROLLED=yes
BOOTPROTO=none                                                                          //设为静态，也可以值为static
IPADDR=192.168.56.105                                                                  //静态ip，避免冲突
NETMASK=255.255.255.0                                                                //子网掩码
#GATEWAY=192.168.56.1                                                               //网关，已注释，如此默认网关就是NAT的10.0.2.2

step4：service network restart ，可能要reboot吧