OpenGL延迟着色照明无法正常工作

Question

所以这是我第一次使用延迟着色，它非常快速和简单。直到我开始没有得到预期的结果。光线的行为方式很奇怪，就好像位置纹理不正确。 （从上到下顺时针：（1）法线，（2）位置，（3）反照率，（4）粗糙度/菲涅尔，（中心）最终）

请注意，灯光（在最终渲染中）的行为方式很奇怪。

这是我的着色器代码： GBuffer.vert

#version 330 core

// I didn't have time to change this into layout (location = ...) ...
attribute vec3 pos;
attribute vec3 norm;
attribute vec3 tangent;
attribute vec2 uv;

out DATA {
    vec3 position;
    vec3 normal;
    vec2 texCoord;
    mat3 tbn;
} VS_OUT;

void main() {
    gl_Position = gl_ModelViewProjectionMatrix * vec4(pos, 1.0);
    VS_OUT.position = (gl_ModelViewMatrix * vec4(pos, 1.0)).xyz;
    VS_OUT.normal = gl_NormalMatrix * norm;

    vec3 n = normalize(VS_OUT.normal);
    vec3 t = normalize(gl_NormalMatrix * tangent);
    t = normalize(t - dot(t, n) * n);
    vec3 b = cross(t, n);

    VS_OUT.tbn = mat3(t, b, n);
    VS_OUT.texCoord = uv;
}

GBuffer.frag

#version 330 core
layout (location = 0) out vec3 g_position;
layout (location = 1) out vec3 g_normal;
layout (location = 2) out vec4 g_diffuse;
layout (location = 3) out vec4 g_material;

struct TSlot {
    int active;
    int type;
    vec2 scale;
    float intensity;
    int blendMode;
};

struct TMaterial {
    vec4 albedo;
    float roughness;
    float fresnel;
};

struct TScene {
    vec3 ambient;
    vec3 viewPosition;
};

// Textures
uniform sampler2D textures[8];
uniform TSlot textureSlots[8];

// Scene
uniform TScene scene;

// Material
uniform TMaterial material;

// Object
in DATA {
    vec3 position;
    vec3 normal;
    vec2 texCoord;
    mat3 tbn;
} FS_IN;

[... blending functions ...]

void main() {
    vec3 N = FS_IN.normal;

    vec4 texs = vec4(1.0);
    vec4 tex0 = vec4(0.0);

    for (int i = 0; i < 8; i++) {
        if (textureSlots[i].active == 0) { continue; }
        vec2 uv = textureSlots[i].scale * FS_IN.texCoord;
        int type = textureSlots[i].type;
        if (type == 0) { // Diffuse
            vec4 diff = texture2D(textures[i], uv);
            texs = blend(texs, diff, textureSlots[i].intensity * diff.a, textureSlots[i].blendMode);
        } if (type == 1) { // Normal
            vec3 encNorm = texture2D(textures[i], uv).xyz;
            vec3 localCoords = normalize(vec3(2.0, 2.0, 1.0) * encNorm - vec3(1.0, 1.0, 0.0));
            N *= normalize(FS_IN.tbn * localCoords);
        } else if (type == 2) { // Sphere Reflection
            vec3 E = normalize(scene.viewPosition - FS_IN.position);
            vec3 R = normalize(reflect(E, N));
            float m = 2.0 * sqrt( 
                pow(R.x, 2.0) + 
                pow(R.y, 2.0) + 
                pow(R.z + 1.0, 2.0) 
            );
            vec2 tex = R.xy / m + 0.5;
            vec4 diff = texture2D(textures[i], tex * textureSlots[i].scale);
            texs = blend(texs, diff, textureSlots[i].intensity * diff.a, textureSlots[i].blendMode);
        } else if (type == 3) { // Roughness Map
            tex0.r = blendNormalFloat(tex0.r, texture2D(textures[i], uv).x, textureSlots[i].intensity);
        } else if (type == 4) { // Fresnel Map
            tex0.g = blendNormalFloat(tex0.g, texture2D(textures[i], uv).x, textureSlots[i].intensity);
        }
    }

    // Outputs
    g_position = FS_IN.position;
    g_normal = N;
    g_diffuse.rgb = texs.rgb * material.albedo.rgb;
    g_diffuse.a = 1.0;
    g_material = vec4(material.roughness + tex0.r, material.fresnel + tex0.g, 0.0, 0.0);
}

Lighting.vert

#version 330 core

void main() {
    gl_Position = ftransform();
    gl_TexCoord[0] = gl_MultiTexCoord0;
    gl_FrontColor = vec4(1.0, 1.0, 1.0, 1.0);
}

Lighting.frag

#version 330 core
layout (location = 0) out vec4 fragColor;

struct TLight {
    vec3 position;
    float intensity;
    vec3 color;
    float radius;
    float cutoff;
    float spotCutoff;
    vec3 direction;
    int type;
};

struct TScene {
    vec3 ambient;
    vec3 viewPosition;
};

// Textures from GBuffer
uniform sampler2D t_position;
uniform sampler2D t_normal;
uniform sampler2D t_diffuse;
uniform sampler2D t_material;

uniform TLight light;
uniform TScene scene;

void main() {
    vec2 uv = gl_TexCoord[0].xy;
    vec3 P = texture2D(t_position, uv).xyz;
    vec3 N = normalize(texture2D(t_normal, uv).xyz);
    vec4 D = texture2D(t_diffuse, uv);
    vec4 M = texture2D(t_material, uv);

    vec3 lighting = D.rgb * 0.1;
    vec3 V = normalize(scene.viewPosition - P);
    vec3 lightDir = normalize(light.position - P);
    vec3 diffuse = max(dot(N, lightDir), 0.0) * D.rgb * light.color * light.intensity;
    lighting += diffuse;

    fragColor = vec4(lighting, 1.0);
}

我正在关注这些教程：http://www.codinglabs.net/tutorial_simple_def_rendering.aspx http://learnopengl.com/#!Advanced-Lighting/Deferred-Shading

编辑：原来我只需要为法线和位置使用浮动纹理

Answer 1

两个想法：

您必须使用浮点纹理，否则您的值会被限制在 [0;1] 范围内，或者如果是法线，您可以将它们缩放并偏置到该范围（并使用比 32F/16F 更小的格式）

除非您将 CPU 侧的灯光位置更改为视图坐标，否则您在光照中同时计算视图位置（来自您的位置 g 缓冲区）和世界坐标（您的灯光位置）。 frag，这肯定会影响输出。

希望对你有帮助！