我也在纠结这个传感器。我的代码执行与您的类似，我不需要超时即可工作。
我能找到的一个区别是：
while i< 1:
GPIO.output(GPIO_TRIGGER, False)
time.sleep(C.time['count'])
我不知道这里的睡眠时间有多长，但这可能是导致问题的原因。如果它与我的相似，将触发器设置为 false 将直接在设置输入/输出引脚之后，然后等待两秒钟以消除噪音。你的等待时间可能会更短，我不知道。在发送脉冲之前，无需再次将触发器设置为 false，我不知道，但这可能会导致错误启动。我会将其更改为类似于我的工作，然后在 while 循环中将设置删除为 false。
GPIO.setup(GPIO_TRIGGER, GPIO.OUT)
GPIO.setup(GPIO_ECHO, GPIO.IN)
GPIO.output(GPIO_TRIGGER, False)
print("Waiting for sensor to settle\n")
time.sleep(2)
我不确定这是否会在不需要超时的情况下解决问题，但我似乎不需要。
我编写了一个用于制作传感器对象的模块，然后允许编写一些更具可读性的脚本。我对 python 也很陌生，根本不是一个有经验的程序员，所以有趣的错误可能存在于某处，但如果你想使用它或只是比较代码，它就在下面：
#! /usr/bin/python3
# dist.py this is a module for objectifying an ultrasonic distance sensor.
import RPi.GPIO as GPIO
import time
class Distancer(object):
#init takes an input of one GPIO for trigger and one for echo and creates the object,
#it searches for a calibration file in the working directory (name)Const.txt, if none
#is found it will initiate a calibration
def __init__(self, trig, cho, name):
self.trigger = trig
self.echo = cho
self.name = name
self.filename = self.name + 'Const.txt'
GPIO.setup(self.trigger, GPIO.OUT)
GPIO.setup(self.echo, GPIO.IN)
GPIO.output(self.trigger, False)
print("Waiting for sensor to calm down")
time.sleep(2)
try:
with open(self.filename, "r") as inConst:
self.theConst = int(inConst.read())
except (OSError, IOError) as e:
print("Not calibrated, initializing calibration")
self.calibrate()
with open(self.filename, "r") as inConst:
self.theConst = int(inConst.read())
#Returns the echo time
def measureTime(self):
GPIO.output(self.trigger, True)
time.sleep(0.00001)
GPIO.output(self.trigger, False)
while GPIO.input(self.echo) == 0:
pulse_start = time.time()
while GPIO.input(self.echo) == 1:
pulse_end = time.time()
pulse_duration = pulse_end - pulse_start
return pulse_duration
#Returns a distance in cm
def measure(self):
return self.measureTime() * self.theConst
#Makes you set up the sensor at 3 different distances in order to find the
#relation between pulse time and distance, it creates the file (name)Const.txt
#in the working directory and stores the constant there.
def calibrate(self):
ten = []
thirty = []
seventy = []
print("Make distance 10 cm, enter when ready")
input()
for i in range(30):
ten.append(10/self.measureTime())
time.sleep(0.2)
print("Make distance 30 cm, enter when ready")
input()
for i in range(30):
thirty.append(30/self.measureTime())
time.sleep(0.2)
print("Make distance 70 cm, enter when ready")
input()
for i in range(30):
seventy.append(70/self.measureTime())
time.sleep(0.2)
allTime = ten + thirty + seventy
theOne = 0.0
for i in range(90):
theOne = theOne + allTime[i]
theOne = theOne / 90
with open(self.filename, "w") as inConst:
inConst.write(str(round(theOne)))
#Will continually check distance with a given interval until something reaches the
#treshold (cm), takes an argument to set wether it should check for something being
#nearer(near) or farther(far) than the treashold. Returns True when treshold is reached.
def distWarn(self, nearfar, treashold):
if nearfar.lower() == "near":
while True:
if self.measure() < treashold:
return True
break
time.sleep(0.2)
if nearfar.lower() == "far":
while True:
if self.measure() > treashold:
return True
break
time.sleep(0.2)
#Will measure with a second interval and print the distance
def keepGoing(self):
while True:
try:
print(str(round(self.measure())) + ' cm')
time.sleep(1)
except KeyboardInterrupt:
print("Won't keep going")
break
我已经用下面的代码运行它来测试它，一切似乎都正常。第一次运行时，它会提示您通过将传感器放置在与某物不同的距离来校准传感器。
#! /usr/bin/python3
import RPi.GPIO as GPIO
import time
import dist as distancer
GPIO.setmode(GPIO.BOARD)
TRIG = 16
ECHO = 18
dist = distancer.Distancer(TRIG, ECHO, 'dist')
def main():
global dist
print(str(round(dist.measureTime(),5)) + ' s')
print(str(round(dist.measure())) + ' cm')
dist.distWarn('near', 10)
print('Warning, something nearer than 10 cm at ' + time.asctime( time.localtime(time.time()) ))
dist.distWarn('far', 10)
print('Warning, something further than 10 cm at ' + time.asctime( time.localtime(time.time()) ))
dist.keepGoing()
GPIO.cleanup()
print('Fin')
if __name__ == "__main__":
try:
main()
except KeyboardInterrupt:
GPIO.cleanup()
print("Exiting")
time.sleep(1)