【问题标题】:SDL Double buffering on HW_SURFACEHW_SURFACE 上的 SDL 双缓冲
【发布时间】:2012-10-21 12:38:03
【问题描述】:

我不明白为什么我的 SDL 应用程序不会按照我的要求设置 DOUBLE_BUF;

这是一个简短的代码,它不带参数执行,以 32 BPP 模式打开一个全屏窗口,1024*768。

#include <stdio.h>
#include <stdlib.h>
#include <SDL/SDL.h>

#include "main.h"

SDL_Surface *screen;
Main mainstruct;

void testModesInFormat(SDL_PixelFormat * format)
{

    SDL_Rect **modes;
    int i;

    printf("Available hardware accelerated, fullscreen modes in %d bpp:\n",
           format->BitsPerPixel);

    modes = SDL_ListModes(format, SDL_FULLSCREEN | SDL_HWSURFACE | SDL_DOUBLEBUF);

    // Check is there are any modes available
    if(modes == (SDL_Rect **) 0)
    {
        printf("\tNo modes available!\n");
        return;
    }

    // Check if our resolution is restricted
    if(modes == (SDL_Rect **) - 1)
    {
        printf("\tAll resolutions available.\n");
    }
    else
    {
        // Print valid modes
        for(i = 0; modes[i]; ++i)
            printf("\t%d x %d\n", modes[i]->w, modes[i]->h);
    }

    free(modes);

}

void testModes()
{
    SDL_PixelFormat format;
    format.BitsPerPixel = 16;
    testModesInFormat(&format);
    format.BitsPerPixel = 24;
    testModesInFormat(&format);
    format.BitsPerPixel = 32;
    testModesInFormat(&format);
}

int main(int argc, char *argv[])
{

    printf("Hello world!\n");
    Uint32 flags = SDL_DOUBLEBUF;
    int w, h, bpp;
    int i;
    int hw_mem = 1;
    w = 1024;
    h = 768;
    bpp = 32;

    mainstruct.full_screen = 1;

    if(SDL_Init(SDL_INIT_AUDIO | SDL_INIT_VIDEO) < 0)
    {
        fprintf(stderr, "Unable to init SDL: %s\n", SDL_GetError());
        exit(1);
    }
    atexit(SDL_Quit);

    for(i = 0; i < argc; i++)
    {
        if(!strcmp(argv[i], "--window"))
        {
            mainstruct.full_screen = 0;
        }
        else if(!strcmp(argv[i], "--no-hardwarememory") || !strcmp(argv[i], "-nohw"))
        {
            hw_mem = 0;
        }
        else if(!strcmp(argv[i], "--test") || !strcmp(argv[i], "-t"))
        {
            testModes();
            exit(0);
        }
    }

    if(hw_mem)
    {
        flags |= SDL_HWSURFACE;
    }
    else
    {
        flags |= SDL_SWSURFACE;
    }
    if(mainstruct.full_screen)
    {
        flags |= SDL_FULLSCREEN;
    }
    fprintf(stderr, "Attempting to set %dx%dx%d video mode.\n", w, h, bpp);
    fflush(stderr);
    screen = SDL_SetVideoMode(w, h, bpp, flags);
    if(screen == NULL)
    {
        fprintf(stderr, "Unable to set %dx%dx%d video: %s\n", w, h, bpp,
                SDL_GetError());
        exit(1);
    }
    fprintf(stderr, "Success:\n");
    fprintf(stderr, "\tSDL_HWSURFACE =%s\n",
            (screen->flags & SDL_HWSURFACE ? "true" : "false"));
    fprintf(stderr, "\tSDL_FULLSCREEN=%s\n",
            (screen->flags & SDL_FULLSCREEN ? "true" : "false"));
    fprintf(stderr, "\tSDL_DOUBLEBUF =%s\n",
            (screen->flags & SDL_DOUBLEBUF ? "true" : "false"));
    fprintf(stderr, "\tw=%d h=%d bpp=%d pitch=%d\n", screen->w, screen->h,
            screen->format->BitsPerPixel, screen->pitch);
    fflush(stderr);
    return 0;
}

如您所见,args 是; --window 禁用全屏 --no-hardwarememory 设置 SDL_SWSURFACE 代替 SDL_HWSURFACE --test 调用 testModes() 函数

这是我的输出;

没有参数(标志是“SDL_DOUBLEBUF | SDL_HWSURFACE | SDL_FULLSCREEN”)我明白了;

Attempting to set 1024x768x32 video mode.
Success:
    SDL_HWSURFACE =false
    SDL_FULLSCREEN=true
    SDL_DOUBLEBUF =false
    w=1024 h=768 bpp=32 pitch=4096

使用 --test 参数,我明白了:

Available hardware accelerated, fullscreen modes in 16 bpp:
    1920 x 1080
    1768 x 992
    1680 x 1050
    [...]
    640 x 480
Available hardware accelerated, fullscreen modes in 24 bpp:
    No modes available!
Available hardware accelerated, fullscreen modes in 32 bpp:
    1920 x 1080
    1768 x 992
    1680 x 1050
    [...]
    640 x 480

对于那些想要编译它的人,这里是 main.h

#ifndef MAIN_H
#define MAIN_H
#include "SDL.h"
#include "SDL_thread.h"

typedef struct _main {
  int full_screen;
} Main;
extern Main mainstruct;

#endif

所以我想了解为什么 DOUBLE_BUF 在 32bpp 全屏中不起作用.. 一些想法?

【问题讨论】:

  • 很好地暴露了问题!

标签: sdl flags doublebuffered


【解决方案1】:

如果您使用的是 Windows,问题可能出在:

SDL 1.2.10 Release Notes
...
Windows Notes 
  The "windib" video driver is the default now, to prevent problems with 
  certain laptops, 64-bit Windows, and Windows Vista. The DirectX driver is 
  still available, and can be selected by setting the environment variable
  SDL_VIDEODRIVER to "directx".
...

http://www.libsdl.org/release/changes.html

在您的代码中添加SDL_putenv("SDL_VIDEODRIVER=directx"); 后,程序会打印出来:

Attempting to set 1024x768x32 video mode.
Success:
    SDL_HWSURFACE =true
    SDL_FULLSCREEN=true
    SDL_DOUBLEBUF =true
    w=1024 h=768 bpp=32 pitch=4096

【讨论】:

  • 是的!谢谢!在搜索为什么我无法获得 HWSURFACE 时,我碰巧使用了完全相同的解决方案:D
猜你喜欢
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 2012-12-22
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 2014-08-08
  • 1970-01-01
相关资源
最近更新 更多