【发布时间】:2016-10-07 04:41:09
【问题描述】:
我正确连接了 USBasp 并更新了固件。 没有构建错误,选择 USBasp 作为工具后,它说 avrdud 已准备好,但我的 led 不会打开。
这是使用 USBasp 加载后出现的内容:
avrdude.exe: set SCK frequency to 32000 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude.exe: Device signature = 0x1e910a
avrdude.exe done. Thank you.
我正在使用 atmel studio 7,笔记本电脑是 windows 10 64bits
【问题讨论】:
-
请解释一下,哪个led"没有亮?是你的MCU上的led还是USBasp上的led。如果你的意思是MCU上的led,请贴代码,构建没有错误不是意思是你的代码是正确的,但是如果它是在 USBasp 上引导的,也许你应该检查你的接线。
标签: avr atmelstudio avrdude winavr