wemos d1（作为客户端）和网络服务器（在 arduino 或 wemos d1 上）通过 LAN [关闭]答案

【问题标题】：Communication between wemos d1(as a client) and a webserver(on arduino or wemos d1) through LAN [closed]wemos d1（作为客户端）和网络服务器（在 arduino 或 wemos d1 上）通过 LAN [关闭]
【发布时间】：2018-05-21 01:08:33
【问题描述】：

所以我想做一些家庭自动化，所以我为我家的每个房间分配了一个 esp8266，所有房间都连接到一个 wifi 作为具有静态 IP 地址的客户端，所以我可以通过发送来控制我的灯获取对每个 esps IP 的请求，所以我的问题是我想在 arduino 或 esp8266 上运行一个网络服务器，以便它可以保存房子所有灯的状态。我可以在 wammp 上轻松地做到这一点，其中 php 将处理客户端 esps 发出的所有 get 请求并将数据保存在数据库中，但是 webserver（在 esp 或 arduino 上）可以处理这些 get 请求并将状态保存在一些内存中。

【问题讨论】：

标签： php c++ http arduino arduino-esp8266

【解决方案1】：

是的，您可以使用 Arduino 运行网络服务器。这是来自https://www.arduino.cc/en/Tutorial/WebServer的示例

/*
  Web Server

 A simple web server that shows the value of the analog input pins.
 using an Arduino Wiznet Ethernet shield.

 Circuit:
 * Ethernet shield attached to pins 10, 11, 12, 13
 * Analog inputs attached to pins A0 through A5 (optional)

 created 18 Dec 2009
 by David A. Mellis
 modified 9 Apr 2012
 by Tom Igoe
 modified 02 Sept 2015
 by Arturo Guadalupi

 */

#include <SPI.h>
#include <Ethernet.h>

// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:
byte mac[] = {
  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
};
IPAddress ip(192, 168, 1, 177);

// Initialize the Ethernet server library
// with the IP address and port you want to use
// (port 80 is default for HTTP):
EthernetServer server(80);

void setup() {
  // Open serial communications and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }


  // start the Ethernet connection and the server:
  Ethernet.begin(mac, ip);
  server.begin();
  Serial.print("server is at ");
  Serial.println(Ethernet.localIP());
}


void loop() {
  // listen for incoming clients
  EthernetClient client = server.available();
  if (client) {
    Serial.println("new client");
    // an http request ends with a blank line
    boolean currentLineIsBlank = true;
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();
        Serial.write(c);
        // if you've gotten to the end of the line (received a newline
        // character) and the line is blank, the http request has ended,
        // so you can send a reply
        if (c == '\n' && currentLineIsBlank) {
          // send a standard http response header
          client.println("HTTP/1.1 200 OK");
          client.println("Content-Type: text/html");
          client.println("Connection: close");  // the connection will be closed after completion of the response
          client.println("Refresh: 5");  // refresh the page automatically every 5 sec
          client.println();
          client.println("<!DOCTYPE HTML>");
          client.println("<html>");
          // output the value of each analog input pin
          for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
            int sensorReading = analogRead(analogChannel);
            client.print("analog input ");
            client.print(analogChannel);
            client.print(" is ");
            client.print(sensorReading);
            client.println("<br />");
          }
          client.println("</html>");
          break;
        }
        if (c == '\n') {
          // you're starting a new line
          currentLineIsBlank = true;
        } else if (c != '\r') {
          // you've gotten a character on the current line
          currentLineIsBlank = false;
        }
      }
    }
    // give the web browser time to receive the data
    delay(1);
    // close the connection:
    client.stop();
    Serial.println("client disconnected");
  }
}

将状态保存在一个全局变量中并在setup() 中初始化它们。当客户端发送它的请求时，它必须发送它的 id 或 ip 并且服务器可以响应状态。

【讨论】：