超时扩展在星号 11 中不起作用答案

【问题标题】：timeout extension is not working in asterisk 11超时扩展在星号 11 中不起作用
【发布时间】：2015-02-05 07:54:14
【问题描述】：

我正在设计如下拨号方案。一切正常，但超时扩展不起作用。
autofallthrough=no 在 extension.conf 文件中被注释。

subContinueOrNot 是从名为“study4”的上下文中调用的子例程。 dialplan 在播放文件 'notCallPress2' 后等待 10 秒，然后返回空值。无效的扩展工作正常。但它不会超时。

[subContinueOrNot]
exten=>s,1,Playback(study4/okCallPress1)
exten=>s,n,Playback(study4/notCallPress2)
exten=>s,n,Set(PARAM=)
exten=>s,n,WaitExten(10)
exten=>s,n(ret),Return(${PARAM})

exten=>1,1,Set(PARAM=1)
exten=>1,n,Goto(s,ret)
exten=>2,1,Set(PARAM=2)
exten=>2,n,Goto(s,ret)

exten=>i,1,GoSub(subInvalid,s,1(${INVALID_EXTEN}))
exten=>i,n,Set(PARAM=${GOSUB_RETVAL})
exten=>i,n,Goto(s,ret)
exten=>t,1,GoSub(subTimeout,s,1())
exten=>t,n,Set(PARAM=timeOut)
exten=>t,n,Goto(s,ret)
exten=>h,1,Goto(study4,h,1,)

下面是星号控制台的输出。

 -- <SIP/101-0000000f> Playing 'study4/weAsk.slin' (language 'en')
    -- Executing [s@study4:10] Gosub("SIP/101-0000000f", "subContinueOrNot,s,1()") in new stack
    -- Executing [s@subContinueOrNot:1] Playback("SIP/101-0000000f", "study4/okCallPress1") in new stack
    -- <SIP/101-0000000f> Playing 'study4/okCallPress1.slin' (language 'en')
    -- Executing [s@subContinueOrNot:2] Playback("SIP/101-0000000f", "study4/notCallPress2") in new stack
    -- <SIP/101-0000000f> Playing 'study4/notCallPress2.slin' (language 'en')
    -- Executing [s@subContinueOrNot:3] Set("SIP/101-0000000f", "PARAM=") in new stack
    -- Executing [s@subContinueOrNot:4] WaitExten("SIP/101-0000000f", "10") in new stack
    -- Timeout on SIP/101-0000000f, continuing...
    -- Executing [s@subContinueOrNot:5] Return("SIP/101-0000000f", "") in new stack
    -- Executing [s@study4:11] Set("SIP/101-0000000f", "RV=") in new stack
    -- Executing [s@study4:12] GotoIf("SIP/101-0000000f", "0?s,cont1:s,stop1") in new stack
    -- Goto (study4,s,13)
    -- Executing [s@study4:13] Playback("SIP/101-0000000f", "study4/callAgain2") in new stack
    -- <SIP/101-0000000f> Playing 'study4/callAgain2.slin' (language 'en')
    -- Executing [s@study4:14] Goto("SIP/101-0000000f", "s,hang") in new stack
    -- Goto (study4,s,57)
    -- Executing [s@study4:57] Hangup("SIP/101-0000000f", "") in new stack
  == Spawn extension (study4, s, 57) exited non-zero on 'SIP/101-0000000f'
    -- Executing [h@study4:1] Verbose("SIP/101-0000000f", "2,"Hanging Up now"") in new stack
  == "Hanging Up now"

【问题讨论】：

标签： timeout asterisk ivr pbx

【解决方案1】：

它按开发人员的预期工作。

只有当您没有下一个分机或所有分机在拨号方案中都没有阻塞时，超时选项才会起作用

exten=>s,n,WaitExten(10)

exten=>i,1,Noop(invalid here)
exten=>t,1,Noop(timeout here)

或

exten=>s,n,Background(somefile);non-blocking playback

exten=>i,1,Noop(invalid here)
exten=>t,1,Noop(timeout here)

http://www.voip-info.org/wiki/view/Asterisk+tips+ivr+menu

【讨论】：