Django Websockets 数据到错误的套接字

Question

使用 Django Websockets + Channels，我创建了一个（一个）组，并且消息来回工作得很好。让我们称之为 A 组

当我在不同的浏览器中打开一个 SECOND 组和一个 SECOND（我们称之为 B 组）WebSocket 连接时，问题就开始了。

我尝试发送到组 A（第一个 WebSocket 连接）的消息将发送到组 B（第二个 WebSocket 连接）。属于 A 组的所有消息都进入第二个 WebSocket，B 组消息也进入第二个套接字。

这是我的 consumer.py

import json
from asgiref.sync import async_to_sync
import logging

LOG = logging.getLogger(__name__)

from channels.generic.websocket import WebsocketConsumer, AsyncWebsocketConsumer


class EventConsumer(AsyncWebsocketConsumer):

    async def connect(self):
        self.id = self.scope['url_route']['kwargs']['id']
        self.group_name = f'enl_events_log_{self.id}'
        # Join room group
        await self.channel_layer.group_add(
            self.group_name,
            self.channel_name
        )

        await self.accept()

    async def disconnect(self, close_code):
        # Leave room group
        await self.channel_layer.group_discard(
            self.group_name,
            self.channel_name
        )

    # Receive message from WebSocket
    async def receive(self, text_data):
        # text_data_json = json.loads(text_data)
        # message = text_data_json['message']

        # Send message to room group
        await self.channel_layer.group_send(
            self.group_name,
            {
                'type': 'send.message',
                'message': "Message received"
            }
        )

    # Receive message from room group
    async def send_message(self, event):
        message = event['message']
        # Send message to WebSocket
        await self.send(text_data=json.dumps({
            'message': message
        }))

这是我的 routing.py

from channels.auth import AuthMiddlewareStack
from channels.routing import ProtocolTypeRouter, URLRouter
from django.conf.urls import url

from app.consumers import EventConsumer

websocket_urlpatterns = [
    url(r'^enl_events/(?P<id>[^/]+)', EventConsumer()),
]

application = ProtocolTypeRouter({
    'websocket': AuthMiddlewareStack(
        URLRouter(
            websocket_urlpatterns
        )
    ),
})

这是我的 ASGI.py + settings.py

import os
import django
from channels.routing import get_default_application

os.environ.setdefault('DJANGO_SETTINGS_MODULE', 'some_app.settings')

django.setup()

application = get_default_application()


--------------

ASGI_APPLICATION = "application"
WSGI_APPLICATION = 'application'


CHANNEL_LAYERS = {
    "default": {
        "BACKEND": "channels_redis.core.RedisChannelLayer",
        "CONFIG": {
            "hosts": [("127.0.0.1", 6379)],
        },
    },
}

这是我的 views.py

def events(request: HttpRequest) -> HttpResponse:
    channel_layer = get_channel_layer()
    async_to_sync(channel_layer.group_send)(
        'groupA_id',
        {'type': 'send.message', 'message': "please work"},
    )
    return HttpResponse(status=202)

我在 3000 端口上运行前端

我正在使用的后端

 Daphne some_app.asgi:application --port=9000

注意：我能够很好地创建两个 WebSocket 连接。 为什么会出现数据不匹配？

如果我为 A 组创建一个 WebSocket，那么属于 A 组的消息是否应该转到 A 组/websocket 1？

下面提供的日志

[2020-11-17 17:17:03 +0000] [89629] [INFO] Configuring endpoint tcp:port=9000:interface=127.0.0.1
[2020-11-17 17:17:03 +0000] [89629] [INFO] Listening on TCP address 127.0.0.1:9000
127.0.0.1:62209 - - [17/Nov/2020:17:17:17] "WSCONNECTING /events/12345" - 
127.0.0.1:62209 - - [17/Nov/2020:17:17:17] "WSCONNECT /events/12345" - -
127.0.0.1:62265 - - [17/Nov/2020:17:17:26] "WSCONNECTING /events/56789" - 
127.0.0.1:62265 - - [17/Nov/2020:17:17:26] "WSCONNECT /events/56789" - -

Answer 1

所以，我找出了导致问题的原因。

路由丢失as_asgi()

from channels.auth import AuthMiddlewareStack
from channels.routing import ProtocolTypeRouter, URLRouter
from django.conf.urls import url

from app.consumers import EventConsumer

websocket_urlpatterns = [
    url(r'^events/(?P<id>[^/]+)', EventConsumer().as_asgi()),
]

application = ProtocolTypeRouter({
    'websocket': AuthMiddlewareStack(
        URLRouter(
            websocket_urlpatterns
        )
    ),
})