【问题标题】:How can I get the variable value inside the EOF tags?如何获取 EOF 标签内的变量值?
【发布时间】:2013-08-01 18:11:36
【问题描述】:

我有以下脚本,但我需要在每个以 EOF 开头并以 EOF 结尾的块中获取 $i 变量值。

不是读取变量值而是放入$i。

/var/tmp/vpn.sh 我有:

#!/bin/bash
amazonEth0="10.0.0.18"
amazonWan0="4.9.2.9"
vpnServer="4.8.8.6"
hosttoHost1="10.109.0.20/32"
hosttoHost2="10.109.0.21/32"
hosttoHost3="10.109.58.6/32"
hosttoHost4="10.109.59.3/32"

for i in 1 2 3 4
do
cat > /tmp/test$i.conf << \EOF
#Step 3
conn test"$i"
    #auto=start
    type=tunnel
    authby=secret
    pfs=no
    aggrmode=no
    ikelifetime=28800s
    lifetime=3600s
    ike=aes128-md5;modp1024!
    phase2alg=aes128-md5;modp1024
    forceencaps=yes
    left=$amazonLan0
    leftid=$amazonWan0
    leftsourceip=$amazonWan0
    right=$vpnServer
    rightsubnet=$hosttoHost$i
EOF
done

### Run me
cat > /var/tmp/vpn.sh << \EOF
service ipsec restart

######## Apply for loop here, instead of many many lines ###########
# for i in 1 2 3 4
# do
#   ipsec auto --add test$i
# done
ipsec auto --add test1
ipsec auto --add test2
ipsec auto --add test3
ipsec auto --add test4

######## Apply for loop here, instead of many many lines ###########
# for i in 1 2 3 4
# do
#   ipsec auto --up test$i
# done
ipsec auto --up test1
ipsec auto --up test2
ipsec auto --up test3
ipsec auto --up test4

ipsec auto --status
ip xfrm policy
ip route show

######## Apply for loop here, instead of many many lines ###########
# for i in 1 2 3 4
# do
#   ping -c 1 $hosttoHost$i
# done
ping -c 1 10.109.0.20; 
ping -c 1 10.109.0.21;
ping -c 1 10.109.58.6; 
ping -c 1 10.109.59.3; 

EOF
chmod +x /var/tmp/vpn.sh

# Cake - eat now - optional 
/var/tmp/vpn.sh > save output | mail -s ipsec date time &

【问题讨论】:

  • 删除 conn test"$i" 上的引号?
  • OK - 但是 $hosttoHost$i 变为 1 而不是 $hosttoHost1 $hosttoHost2 ...

标签: linux bash amazon-ec2 vpn openvpn


【解决方案1】:

去掉EOF之前的反斜杠:

#!/bin/bash

i=ok

# This prints "Bwah ok"
cat <<EOF
Bwah $i
EOF

# This prints "Bwah $i"
cat <<\EOF
Bwah $i
EOF

要让你的最后一行显示 rightsubnet="10.109.0.20/32"(对于 i=1),你需要这样的东西:

i=1
val1=beep
val2=bop

rightval="val$i"
cat <<EOF
This is a beep: ${!rightval}
EOF

也就是说,您计算所需变量的名称,将其放入另一个变量中,然后使用${!var} 语法。

但是对于那种事情你应该使用数组:

i=0
vals=(beep bop)

cat <<EOF
This is a beep: ${vals[$i]}
EOF

但请注意,索引从 0 开始。

【讨论】:

  • $hosttoHost$i 变为 1 而不是 $hosttoHost1
  • 谢谢。我不能在 cat
  • 再次编辑:您可以使用数组,它更具可读性并且您不必计算其他变量的名称。
猜你喜欢
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 1970-01-01
  • 2012-02-26
  • 1970-01-01
相关资源
最近更新 更多