使用 rspec-rails 测试无数据库 Rails 5 应用程序

【问题标题】：Testing a databaseless Rails 5 application with rspec-rails使用 rspec-rails 测试无数据库 Rails 5 应用程序
【发布时间】：2023-03-17 23:33:02
【问题描述】：

我有一个不受任何数据库支持的 Rails 5.0.1 应用程序。在尝试编写控制器测试时，我得到了一个ActiveRecord::ConnectionNotEstablished 异常，即使我已明确配置我的spec/rails_helper.rb 不使用ActiveRecord 并删除了config/application.rb 中对active_record 的引用。 RSpec 正在尝试在需要建立数据库连接的事务中运行此类测试。我附上了堆栈跟踪以供参考，我使用这个 Github 问题来设置没有ActiveRecordrspec-rails for a rails project without db connection 的 RSpec。

失败：

1) ApplicationController 真假不等于真 失败/错误：引发 ConnectionNotEstablished，“找不到 ID 为 #{spec_name} 的连接池。”除非池

 ActiveRecord::ConnectionNotEstablished:
   No connection pool with id primary found.
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:882:in `retrieve_connection'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/connection_handling.rb:128:in `retrieve_connection'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/connection_handling.rb:91:in `connection'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/fixtures.rb:516:in `create_fixtures'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/fixtures.rb:1015:in `load_fixtures'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/fixtures.rb:988:in `setup_fixtures'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/activerecord-5.0.1/lib/active_record/fixtures.rb:852:in `before_setup'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-rails-3.6.1/lib/rspec/rails/adapters.rb:126:in `block (2 levels) in <module:MinitestLifecycleAdapter>'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:447:in `instance_exec'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:447:in `instance_exec'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:375:in `execute_with'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:606:in `block (2 levels) in run_around_example_hooks_for'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:342:in `call'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:607:in `run_around_example_hooks_for'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:464:in `run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:457:in `with_around_example_hooks'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:500:in `with_around_and_singleton_context_hooks'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:251:in `run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:627:in `block in run_examples'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:623:in `map'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:623:in `run_examples'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:589:in `run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:590:in `block in run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:590:in `map'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:590:in `run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:118:in `block (3 levels) in run_specs'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:118:in `map'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:118:in `block (2 levels) in run_specs'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/configuration.rb:1894:in `with_suite_hooks'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:113:in `block in run_specs'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/reporter.rb:79:in `report'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:112:in `run_specs'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:87:in `run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:71:in `run'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:45:in `invoke'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/gems/rspec-core-3.6.0/exe/rspec:4:in `<top (required)>'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/bin/rspec:23:in `load'
 # /home/vagrant/.bundle/easypost_admin/ruby/2.3.0/bin/rspec:23:in `<top (required)>'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/cli/exec.rb:63:in `load'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/cli/exec.rb:63:in `kernel_load'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/cli/exec.rb:24:in `run'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/cli.rb:304:in `exec'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/vendor/thor/lib/thor/command.rb:27:in `run'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/vendor/thor/lib/thor/invocation.rb:126:in `invoke_command'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/vendor/thor/lib/thor.rb:359:in `dispatch'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/vendor/thor/lib/thor/base.rb:440:in `start'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/cli.rb:11:in `start'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/exe/bundle:27:in `block in <top (required)>'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/lib/bundler/friendly_errors.rb:98:in `with_friendly_errors'
 # /opt/ruby2.3/lib64/ruby/gems/2.3.0/gems/bundler-1.12.5/exe/bundle:19:in `<top (required)>'
 # /vagrant/easypost_admin/vendor/bundle/bundle:23:in `load'
 # /vagrant/easypost_admin/vendor/bundle/bundle:23:in `<main>'
 #
 #   Showing full backtrace because every line was filtered out.
 #   See docs for RSpec::Configuration#backtrace_exclusion_patterns and
 #   RSpec::Configuration#backtrace_inclusion_patterns for more information.

在 0.0058 秒内完成（文件加载需要 2.29 秒） 1 个示例，1 个失败

失败的例子：

rspec ./spec/controllers/application_controller_spec.rb:15 # ApplicationController 真假不等于真

更新

rails_help.rb

require 'spec_helper'
ENV['RAILS_ENV'] ||= 'test'
require File.expand_path('../../config/environment', __FILE__)
# Prevent database truncation if the environment is production
abort("The Rails environment is running in production mode!") if Rails.env.production?
require 'rspec/rails'
# Add additional requires below this line. Rails is not loaded until this point!

# Checks for pending migration and applies them before tests are run.
# If you are not using ActiveRecord, you can remove this line.
# ActiveRecord::Migration.maintain_test_schema!

RSpec.configure do |config|
  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
  # config.fixture_path = "#{::Rails.root}/spec/fixtures"

  # If you're not using ActiveRecord, or you'd prefer not to run each of your
  # examples within a transaction, remove the following line or assign false
  # instead of true.
  config.use_transactional_fixtures = false
  # The different available types are documented in the features, such as in
  # https://relishapp.com/rspec/rspec-rails/docs
  config.infer_spec_type_from_file_location!

  # Filter lines from Rails gems in backtraces.
  config.filter_rails_from_backtrace!
end

spec_helper.rb

RSpec.configure do |config|
  # rspec-expectations config goes here. You can use an alternate
  # assertion/expectation library such as wrong or the stdlib/minitest
  # assertions if you prefer.
  config.expect_with :rspec do |expectations|
    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
  end

  # rspec-mocks config goes here. You can use an alternate test double
  # library (such as bogus or mocha) by changing the `mock_with` option here.
  config.mock_with :rspec do |mocks|
    # Prevents you from mocking or stubbing a method that does not exist on
    # a real object. This is generally recommended, and will default to
    # `true` in RSpec 4.
    mocks.verify_partial_doubles = true
  end

  config.shared_context_metadata_behavior = :apply_to_host_groups
end

【问题讨论】：

  • 你能给我们看看你的 spec_helper.rb 和 rails_helper.rb 吗？
  • 您是否将rails_helper.rb 中的config.use_transactional_fixtures = true 更改为false？
  • @Leito 我更新了我的问题以包括rails_helper.rb 和spec_helper.rb。 @mindlis 是 config.use_transactional_fixtures = false 它设置为 false。

标签： ruby-on-rails rails-activerecord rspec-rails ruby-on-rails-5 no-database


【解决方案1】：

我在没有数据库的 rails 5.2.0.alpha 应用程序中遇到了同样的问题 配置。所以我查看了 rspec-rails 代码，并发现了这一点 导致所有麻烦的行：

rspec-rails/lib/rspec/rails/fixture_support.rb:

if defined?(ActiveRecord::TestFixtures)

它检查加载的 ActiveRecord 常量，该常量实际上已加载。一世 也有require 'active_record/railtie' 被注释掉了 config/application.rb。然后我弄清楚谁需要 ActiveStorage gem （捆绑锁）。就我而言，它是 ActiveStorage。

我只使用没有数据库的 ActiveStorage 功能，所以我不得不 删除我的 spec/rails_helper.rb 上的 ActiveRecord 常量：

# frozen_string_literal: true

# This file is copied to spec/ when you run 'rails generate rspec:install'
require 'spec_helper'
ENV['RAILS_ENV'] ||= 'test'
require File.expand_path('../../config/environment', __FILE__)

# Remove the ActiveRecord constant, because it is autloaded by
# ActiveStorage and not needed for our application. The presence
# of the ActiveRecord constant causes rspec-rails to include
# extra fixture support, which results in:
#
#   ActiveRecord::ConnectionNotEstablished:
#     No connection pool with 'primary' found.
#
Object.send(:remove_const, :ActiveRecord)

注意顺序，需要放在后面

require File.expand_path('../../config/environment', __FILE__)

之前

require 'rspec/rails'

这个方案只是修改了测试环境。

更新

我创建了an issue on rspec-rails，它的目标是创建全局 rspec 配置以关闭 ActiveRecord 处理。

【讨论】：

  • 感谢您的破解解决方案！我不会那么容易解决的。很遗憾，您对 rspec-rails 的问题没有引起他们的注意来解决问题。对于那些有同样问题的人，我使用的是 Rails 5.2 和 Rspec-rails 3.7。
【解决方案2】：

fix for this 刚刚合并到 rspec-rails，据说下周有时会与 RSpec Rails 4.0 一起发布。

您必须在spec/rails_helper.rb 中设置以下内容：

config.use_active_record = false

同样，问题是如果您没有配置/使用数据库连接，但 ActiveRecord 仍然存在（由于 Bundler 加载它或其他一些原因）。

【讨论】：

    猜你喜欢
    • 1970-01-01
    • 1970-01-01
    • 1970-01-01
    • 1970-01-01
    • 1970-01-01
    • 1970-01-01
    • 2012-07-28
    • 1970-01-01
    • 1970-01-01
    相关资源
    最近更新 更多
    热门标签
    Java Python linux javascript Mysql C# Docker 算法 前端 SpringBoot Redis Vue spring 设计模式 .net core .net kubernetes c++ 数据库 数据结构 大数据 js 机器学习 微服务 Android Go 程序员 面试 JVM ASP.net core 云原生 人工智能 后端 PHP git CSS golang k8s Nginx Django mybatis 深度学习 多线程 React 架构 devops 爬虫 云计算 Spring Boot LeetCode