Microsoft JScript 运行时错误对象不支持此属性或方法答案

【问题标题】：Microsoft JScript runtime error Object doesn't support this property or methodMicrosoft JScript 运行时错误对象不支持此属性或方法
【发布时间】：2010-06-01 20:44:20
【问题描述】：

所以我试图在我的 javascript 中调用此函数，但它给了我“Microsoft JScript 运行时错误对象不支持此属性或方法”的错误，我不知道为什么。它在尝试调用 hmacObj.getHMAC 时发生。这是来自 jsSHA 网站：http://jssha.sourceforge.net/ 使用 hmac-sha1 算法加密。谢谢！

hmacObj = new jsSHA(signature_base_string,"HEX");

signature = hmacObj.getHMAC(signature_key,"HEX","SHA-1","HEX");

在此之上，我从 sha.js 复制了代码

sn-p：

function jsSHA(srcString, inputFormat) {

 /*
  * Configurable variables. Defaults typically work
  */
 jsSHA.charSize = 8; // Number of Bits Per character (8 for ASCII, 16 for Unicode)
 jsSHA.b64pad  = ""; // base-64 pad character. "=" for strict RFC compliance
 jsSHA.hexCase = 0; // hex output format. 0 - lowercase; 1 - uppercase

 var sha1 = null;
 var sha224 = null;

它正在调用的函数（在 jsSHA 函数内部）

this.getHMAC = function (key, inputFormat, variant, outputFormat) {
        var formatFunc = null;
        var keyToUse = null;
        var blockByteSize = null;
        var blockBitSize = null;
        var keyWithIPad = [];
        var keyWithOPad = [];
        var lastArrayIndex = null;
        var retVal = null;
        var keyBinLen = null;
        var hashBitSize = null;

        // Validate the output format selection
        switch (outputFormat) {
        case "HEX":
            formatFunc = binb2hex;
            break;
        case "B64":
            formatFunc = binb2b64;
            break;
        default:
            return "FORMAT NOT RECOGNIZED";
        }

        // Validate the hash variant selection and set needed variables
        switch (variant) {
        case "SHA-1":
            blockByteSize = 64;
            hashBitSize = 160;
            break;
        case "SHA-224":
            blockByteSize = 64;
            hashBitSize = 224;
            break;
        case "SHA-256":
            blockByteSize = 64;
            hashBitSize = 256;
            break;
        case "SHA-384":
            blockByteSize = 128;
            hashBitSize = 384;
            break;
        case "SHA-512":
            blockByteSize = 128;
            hashBitSize = 512;
            break;
        default:
            return "HASH NOT RECOGNIZED";
        }

        // Validate input format selection
        if ("HEX" === inputFormat) {
            // Nibbles must come in pairs
            if (0 !== (key.length % 2)) {
                return "KEY MUST BE IN BYTE INCREMENTS";
            }
            keyToUse = hex2binb(key);
            keyBinLen = key.length * 4;
        } else if ("ASCII" === inputFormat) {
            keyToUse = str2binb(key);
            keyBinLen = key.length * jsSHA.charSize;
        } else {
            return "UNKNOWN KEY INPUT TYPE";
        }

        // These are used multiple times, calculate and store them
        blockBitSize = blockByteSize * 8;
        lastArrayIndex = (blockByteSize / 4) - 1;

        // Figure out what to do with the key based on its size relative to
        // the hash's block size
        if (blockByteSize < (keyBinLen / 8)) {
            if ("SHA-1" === variant) {
                keyToUse = coreSHA1(keyToUse, keyBinLen);
            } else {
                keyToUse = coreSHA2(keyToUse, keyBinLen, variant);
            }
            // For all variants, the block size is bigger than the output size
            // so there will never be a useful byte at the end of the string
            keyToUse[lastArrayIndex] &= 0xFFFFFF00;
        } else if (blockByteSize > (keyBinLen / 8)) {
            // If the blockByteSize is greater than the key length, there will
            // always be at LEAST one "useless" byte at the end of the string
            keyToUse[lastArrayIndex] &= 0xFFFFFF00;
        }

        // Create ipad and opad
        for (var i = 0; i <= lastArrayIndex; i++) {
            keyWithIPad[i] = keyToUse[i] ^ 0x36363636;
            keyWithOPad[i] = keyToUse[i] ^ 0x5C5C5C5C;
        }

        // Calculate the HMAC
        if ("SHA-1" === variant) {
            retVal = coreSHA1(keyWithIPad.concat(strToHash), blockBitSize + strBinLen);
            retVal = coreSHA1(keyWithOPad.concat(retVal), blockBitSize + hashBitSize);
        } else {
            retVal = coreSHA2(keyWithIPad.concat(strToHash), blockBitSize + strBinLen, variant);
            retVal = coreSHA2(keyWithOPad.concat(retVal), blockBitSize + hashBitSize, variant);
        }

        return (formatFunc(retVal));
    };

【问题讨论】：

您确定在此之前没有抛出错误吗？
我已经记录下来给我看。并且整个函数定义都在这个错误之上。 2010-06-01 14:36:22 T08A0 错误 - scriptedtest.cpp(102) -Script: scripts/BuildOAuthTwitterRequest.js at .失败的。错误：Microsoft JScript 运行时错误对象不支持此属性或方法 EXCEPINFO.scode = 0x800a01b6 (FormatMessage() 错误 317 (0x13d) 翻译错误 2148139446 (0x800a01b6)) -------------- ------------------ 签名 = hmacObj.getHMAC(signature_key,"HEX","SHA-1","HEX"); .\scripts\BuildOAuthTwitterRequest.js 的第 1207 行
您是否使用 firebug 或 IE 开发工具进入 getHMAC？
那么脚本是通过 C++ 运行的，所以它不在 IE 或 firefox 中查看，它在发送通过日志文件输出的 http 请求时工作正常。可能是 JScript 引擎，如果我弄清楚了，我会告诉你。

标签： javascript

【解决方案1】：

所以我发现当我实例化对象时，它并没有在其中创建实际的函数。通过一些调整，我能够让它出现并能够调用该函数。

还注意到调用 Object.getHMAC(String,string,string,string) 并不总是理解您的字符串与其功能兼容。感谢所有帮助过的人。（约翰和肖恩）

【讨论】：