【发布时间】：2019-07-16 13:53:58
【问题描述】：
我正在新的树莓派 4 上对我的 arduino uno 进行编程。我已经安装了 arduino IDE v1.8.9，但在编译代码时遇到了问题。
我收到一个错误。
avr-g++: 错误: device-specs/specs-atmega328p: 没有这样的文件或目录
请帮忙。
我正在运行 Rasbian Os
/*
AnalogReadSerial
Reads an analog input on pin 0, prints the result to the Serial Monitor.
Graphical representation is available using Serial Plotter (Tools > Serial Plotter menu).
Attach the center pin of a potentiometer to pin A0, and the outside pins to +5V and ground.
This example code is in the public domain.
http://www.arduino.cc/en/Tutorial/AnalogReadSerial
*/
// the setup routine runs once when you press reset:
void setup() {
// initialize serial communication at 9600 bits per second:
Serial.begin(9600);
}
// the loop routine runs over and over again forever:
void loop() {
// read the input on analog pin 0:
int sensorValue = analogRead(A0);
// print out the value you read:
Serial.println(sensorValue);
delay(1); // delay in between reads for stability
}
【问题讨论】：
标签： arduino-ide