【发布时间】：2020-08-18 05:08:39
【问题描述】：
TLDR;如何批量格式化我的 JSON 文件以提取到 Elasticsearch？
我正在尝试将一些 NOAA 数据提取到 Elasticsearch 中，并且一直在使用 NOAA Python SDK。
我编写了以下 Python 脚本来加载数据并将其以 JSON 格式存储。
from noaa_sdk import noaa
import json
n = noaa.NOAA()
alerts = n.alerts()
f = open('nhc_alerts.json', 'w')
json.dump(alerts, f)
f.write('\n')
JSON 输出：
{"@context": ["https://raw.githubusercontent.com/geojson/geojson-ld/master/contexts/geojson-base.jsonld", {"wx": "https://api.weather.gov/ontology#", "@vocab": "https://api.weather.gov/ontology#"}], "type": "FeatureCollection", "features": [{"id": "https://api.weather.gov/alerts/NWS-IDP-PROD-KEEPALIVE-5246", "type": "Feature", "geometry": null, "properties": {"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-KEEPALIVE-5246", "@type": "wx:Alert", "id": "NWS-IDP-PROD-KEEPALIVE-5246", "areaDesc": "Montgomery", "geocode": {"UGC": ["MDC031"], "SAME": ["024031"]}, "affectedZones": ["https://api.weather.gov/zones/county/MDC031"], "references": [], "sent": "2020-04-25T19:21:03+00:00", "effective": "2020-04-25T19:21:03+00:00", "onset": null, "expires": "2020-04-25T19:31:03+00:00", "ends": null, "status": "Test", "messageType": "Alert", "category": "Met", "severity": "Unknown", "certainty": "Unknown", "urgency": "Unknown", "event": "Test Message", "sender": "w-nws.webmaster@noaa.gov", "senderName": "NWS", "headline": null, "description": "Monitoring message only. Please disregard.", "instruction": "Monitoring message only. Please disregard.", "response": "None", "parameters": {"PIL": ["NWSKEPWBC"], "BLOCKCHANNEL": ["CMAS", "EAS", "NWEM"]}}}, {"id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4179499-3536427", "type": "Feature", "geometry": null, "properties": {"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4179499-3536427", "@type": "wx:Alert", "id": "NWS-IDP-PROD-4179499-3536427", "areaDesc": "La Salle; Livingston", "geocode": {"UGC": ["ILZ019", "ILZ032"], "SAME": ["017099", "017105"]}, "affectedZones": ["https://api.weather.gov/zones/forecast/ILZ019", "https://api.weather.gov/zones/forecast/ILZ032"], "references": [{"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4179245-3536278", "identifier": "NWS-IDP-PROD-4179245-3536278", "sender": "w-nws.webmaster@noaa.gov", "sent": "2020-04-25T10:02:00-05:00"}, {"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4178935-3536074", "identifier": "NWS-IDP-PROD-4178935-3536074", "sender": "w-nws.webmaster@noaa.gov", "sent": "2020-04-25T03:09:00-05:00"}], "sent": "2020-04-25T14:21:00-05:00", "effective": "2020-04-25T14:21:00-05:00", "onset": "2020-04-25T14:21:00-05:00", "expires": "2020-04-25T22:30:00-05:00", "ends": "2020-04-26T01:00:00-05:00", "status": "Actual", "messageType": "Update", "category": "Met", "severity": "Severe", "certainty": "Possible", "urgency": "Future", "event": "Flood Watch", "sender": "w-nws.webmaster@noaa.gov", "senderName": "NWS Chicago IL", "headline": "Flood Watch issued April 25 at 2:21PM CDT until April 26 at 1:00AM CDT by NWS Chicago IL", "description": "The Flood Watch is now in effect for\n\n* Livingston and La Salle counties in north central Illinois\n\n* Until 1 AM CDT Sunday\n\n* WHAT...Steady rain. One to two inches of rain has already\nfallen. Additional rainfall amounts of one inch or locally more\nare possible which may lead to total rainfall amounts in excess\nof three inches.\n\n* IMPACTS...Rises in rivers and small streams will occur with\nflooding possible. This especially includes the Vermilion River\nand its tributary streams, and the Illinois River. Roadways,\nviaducts, ditches, agricultural land, and other poor drainage\nareas may become flooded.", "instruction": "A Flood Watch means there is a potential for flooding based on\ncurrent forecasts.\n\nYou should monitor later forecasts and be alert for possible\nFlood Warnings. Those living in areas prone to flooding should be\nprepared to take action should flooding develop.", "response": "Prepare", "parameters": {"NWSheadline": ["FLOOD WATCH NOW IN EFFECT UNTIL 1 AM CDT SUNDAY"], "VTEC": ["/O.EXT.KLOT.FA.A.0002.000000T0000Z-200426T0600Z/"], "EAS-ORG": ["WXR"], "PIL": ["LOTFFALOT"], "BLOCKCHANNEL": ["CMAS", "EAS", "NWEM"], "eventEndingTime": ["2020-04-26T01:00:00-05:00"]}}}, {"id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4179497-3536425", "type": "Feature", "geometry": null, "properties": {"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4179497-3536425", "@type": "wx:Alert", "id": "NWS-IDP-PROD-4179497-3536425", "areaDesc": "San Luis Obispo County Central Coast; Santa Barbara County Central Coast; Santa Ynez Valley", "geocode": {"UGC": ["CAZ034", "CAZ035", "CAZ036"], "SAME": ["006079", "006083"]}, "affectedZones": ["https://api.weather.gov/zones/forecast/CAZ034", "https://api.weather.gov/zones/forecast/CAZ035", "https://api.weather.gov/zones/forecast/CAZ036"], "references": [{"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4177692-3535278", "identifier": "NWS-IDP-PROD-4177692-3535278", "sender": "w-nws.webmaster@noaa.gov", "sent": "2020-04-24T08:54:00-07:00"}, {"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4178774-3535999", "identifier": "NWS-IDP-PROD-4178774-3535999", "sender": "w-nws.webmaster@noaa.gov", "sent": "2020-04-24T21:37:00-07:00"}, {"@id": "https://api.weather.gov/alerts/NWS-IDP-PROD-4179040-3536147", "identifier": "NWS-IDP-PROD-4179040-3536147", "sender": "w-nws.webmaster@noaa.gov", "sent":
这个脚本解决了我遇到的一些格式化问题，我的下一个障碍是尝试格式化它，以便我可以利用 elasticsearch 中的批量导入功能。我偶然发现了an answer，它在一定程度上有效，我遇到的问题是它会插入适当的索引字符串，但它是在每个字符之后执行的。
批量转换脚本：
import json
JSON_FILE_IN = "nhc_alerts.json"
JSON_FILE_OUT = "nhc_bulk.json"
out = open(JSON_FILE_OUT, 'w')
with open(JSON_FILE_IN, 'r') as json_in:
docs = json.dumps(json_in.read())
for doc in docs:
out.write('%s\n' % json.dumps({'index': {}}));
out.write('%s\n' % json.dumps(doc, indent=0).replace('\n', ''))
批量脚本的输出：
{"index": {}}
"\""
{"index": {}}
"{"
{"index": {}}
"\\"
{"index": {}}
"\""
{"index": {}}
"@"
{"index": {}}
"c"
{"index": {}}
"o"
{"index": {}}
"n"
{"index": {}}
"t"
{"index": {}}
"e"
{"index": {}}
"x"
{"index": {}}
"t"
{"index": {}}
"\\"
{"index": {}}
"\""
{"index": {}}
":"
{"index": {}}
" "
{"index": {}}
"["
{"index": {}}
"\\"
{"index": {}}
"\""
{"index": {}}
"h"
{"index": {}}
"t"
{"index": {}}
"t"
{"index": {}}
"p"
{"index": {}}
"s"
{"index": {}}
":"
{"index": {}}
"/"
{"index": {}}
"/"
{"index": {}}
"r"
{"index": {}}
"a"
{"index": {}}
"w"
{"index": {}}
"."
{"index": {}}
"g"
{"index": {}}
"i"
{"index": {}}
"t"
{"index": {}}
"h"
{"index": {}}
"u"
{"index": {}}
"b"
{"index": {}}
"u"
{"index": {}}
"s"
{"index": {}}
"e"
{"index": {}}
"r"
{"index": {}}
"c"
{"index": {}}
"o"
{"index": {}}
"n"
{"index": {}}
理想情况下，我想将这两个脚本合并为一个，但此时，如果能完成工作，我将运行两个单独的脚本。
【问题讨论】：
-
你又问了什么问题？
-
你想索引
alerts['features']的内容吗？ -
@mkrieger1 如何批量格式化 JSON 文件以供 Elasticsearch 提取？
-
可以分享
nhc_alerts.json的前几行吗？我怀疑其中没有换行符（因此您要遍历长行的字符）并且您需要遍历alerts而不是一次性将它们全部倾倒 -
是的，我就是这么想的……这一切都在一条线上，所以它不会像现在这样工作。是否要索引
alert.features数组中的元素？
标签： python json elasticsearch