wuyoucao

1、wmware设置

  这篇记录下nat网络模式下虚拟机与主机的相互ping通。首先使用wmware建立一个ubuntu虚拟机,网络模式选择nat模式。然后点击虚拟网络编辑:

接下来点击nat设置:

看到如下:

上面红框是关键,记录这个值,下面虚拟机设置静态ip要用到。

2、window网络设置

  打开网络适配器页面,选择VMnet,右键->属性->Internet协议版本 4(TCP/IPV4)->属性,设置ip地址为上面上面网关地址最后一个数改成1,比如192.168.128.2就要设置为192.168.128.1,同时设置子网掩码为255.255.255.0,默认网关不要填。我的如下:

如果想让虚拟机能够访问主机需要关闭主机的防火墙

3、ubuntu设置

  编辑/etc/network/interfaces

vim /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto ens33
# dhcp 改成static,然后设置下面的address,netmask,gateway
iface ens33 inet static
address 192.168.128.129
netmask 255.255.255.0
gateway 192.168.128.2
# 设置dns
dns-nameservers 192.168.128.2

然后执行/etc/init.d/networking restart,或者重启虚拟机以启用网络设置。

3、验证

  现在虚拟机中ping 192.168.128.1可以ping通,主机中ping 192.168.128.129也可ping通。

相关文章: